Porter-Cable 7751 instruction manual Double Insulated Hammer-Drill

Page 1

ESPAÑOL: PÁGINA 17

FRANÇAISE : PAGE 31

Instruction manual

Double Insulated

Hammer-Drill

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2005 Porter-Cable Corporation

MODEL 7751

IMPORTANT

Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations.

The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

Part No. 901010 - 02-11-05

Image 1
Contents Double Insulated Hammer-Drill Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Use only the chuck key to tighten or loosen the chuck Additional Specific Safety RulesSymbol Definition Motor Carton ContentsExtension Cord Selection Installing and Removing Drill Bits AssemblyFunctional Description ForewordTo Start and Stop the Drill OperationDrilling or HAMMER-DRILLING Attaching the Auxiliary Handle TWO Speed Gear ShiftHOW to Hold the HAMMER-DRILL Installing and Adjusting the Depth GaugeHOW to USE the HAMMER-DRILL Keep Tool Clean Troubleshooting MaintenanceFailure to Start LubricationAccessories ServiceReplacement Parts Service and Repairs PORTER-CABLE Limited ONE Year Warranty WarrantyCanadian PORTER-CABLE Delta Service Centers