MAINTENANCE
KEEP TOOL CLEAN
All plastic parts should be cleaned with a soft damp cloth. NEVER use sol- vents to clean plastic parts. They could very possibly dissolve or otherwise damage the material.
FAILURE TO START
Should your tool fail to start, make sure battery pack is charged and properly installed in tool.
BATTERY
The battery pack will discharge by itself without damage if stored for long peri- ods of time, and may require recharging before use.
LUBRICATION
For your continued safety and electrical protection, lubrication and service on this tool should ONLY be performed by an AUTHORIZED DELTA SERVICE STATION or a
At approximately 100 hours of use, take or send your tool to your nearest Authorized Delta Service Station to be thoroughly cleaned and inspected; worn parts replaced, when necessary; relubricated with fresh lubricant, and performance tested.
SERVICE AND REPAIRS
All quality tools will eventually require servicing or replacement of parts due to wear from normal use. These operations, including brush inspection and replacement, should ONLY be performed by either an AUTHORIZED DELTA SERVICE STATION or a
Should you have any questions about your tool, feel free to write us at any time. In any communications, please give all information shown on the name- plate of your tool (model number, type, serial number, etc.).
ACCESSORIES
A complete line of accessories is available from your
Since accessories other than those offered by Porter- Cable•Delta, have not been tested with this product use of such accessories could be hazardous. For safest operation, only
•Delta recommended accessories should be used with this product.
12