Porter-Cable MODEL 505 Troubleshooting Maintenance, Keep Tool Clean, Failure to Start

Page 13

TROUBLESHOOTING

For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Porter-Cable help line at 1-800-487-8665.

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

This tool has been lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. No further lubrication is necessary.

BRUSH INSPECTION (If applicable)

For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be performed by an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE•DELTA FACTORY SERVICE CENTER.

At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricated with fresh lubricant. Have new brushes installed, and test the tool for performance.

Any loss of power before the above maintenance check may indicate the need for immediate servicing of your tool. DO NOT CONTINUE TO OPERATE TOOL UNDER THIS CONDITION. If proper operating voltage is present, return your tool to the service station for immediate service.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual Finishing Sander Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Symbol Definition Additional Safety Rules for Paint Removal Motor Carton ContentsExtension Cord Selection Functional Description AssemblyOperation Operating the SwitchStarting to Work Working ProcedureRequirements for Fine Finishing Removing Paint and VarnishKeep Tool Clean Troubleshooting MaintenanceFailure to Start LubricationAccessories ServiceWarranty Replacement Parts Service and RepairsCanadian PORTER-CABLE Delta Service Centers

MODEL 505 specifications

The Porter-Cable Model 505 is a versatile and robust woodworker’s tool that has become a staple for both amateur and professional craftsmen. This models also offers several features and technologies that enhance its performance and usability, making it an essential addition to any workshop or job site.

One of the standout features of the Model 505 is its powerful motor. Designed with a 5 amp motor, it delivers consistent performance while handling various materials with ease. The motor operates at a no-load speed of up to 21,000 RPM, allowing for efficient and precise cuts. This power makes it suitable for a wide range of tasks, from crafting intricate joints to creating clean edges on larger projects.

The Model 505 includes a unique plunge mechanism that allows for seamless depth adjustments. This feature provides users with the ability to quickly set the desired depth of cut, improving both accuracy and efficiency. The precision depth adjustment enables woodworkers to work with varying thicknesses and types of wood, ensuring they achieve the desired results every time.

Another notable technology incorporated into the Porter-Cable Model 505 is its dual rack and pinion system. This system enhances the stability and accuracy of the tool during operation, minimizing the risk of wobbling and enhancing the overall cutting experience. As a result, users can expect smoother cuts and cleaner finishes, which are crucial for professional-quality projects.

The design of the Model 505 is user-oriented, featuring an ergonomic handle that reduces fatigue during prolonged use. Additionally, its lightweight construction ensures that the tool can be easily maneuvered without compromising on power. The easy-to-use blade release and changing mechanism further streamline the workflow, allowing quick transitions between different blades for varied applications.

Safety is also a paramount consideration in the design of the Model 505. With features such as a dust blower that keeps the cutting area clear and an integrated spark guard, users can operate the tool with added confidence. These safety features ensure that operations are not only effective but also secure.

In conclusion, the Porter-Cable Model 505 is a feature-rich, reliable tool designed for woodworkers seeking precision, performance, and safety. Its powerful motor, plunge capability, and ergonomic design make it an excellent choice for both hobbyists and professionals. Whether creating joints, trimming edges, or intricate decorative work, the Model 505 stands out as a dependable ally in any woodworking project.
Top Page Image Contents