Porter-Cable 335 instruction manual Maintenance

Page 10

900007 - 02-28-01.QXD 9/26/02 11:46 AM Page 10

USING THE SANDER

1.CAUTION: Secure work to prevent if from moving during the sanding operation. Friction between the sanding disc and work will try to spin work away from sander and may cause bodily injury.

2.CAUTION: WEAR SAFETY GLASSES AND DUST MASK.

3.Place sander pad in light contact with the work before switching the motor “ON”.

4.Grasp sander firmly and move switch to “ON” position.

5.Move sander in long overlapping strokes. Tipping sander or stopping in one spot can produce an uneven finish.

6.When finished, keep pad in contact with work, move switch to “OFF” position and lift sander from the work. Allow pad rotation to stop completely before setting sander down.

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry, compressed air. Remove buildup of grime resulting from working with green or sappy wood. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts.

CAUTION: Wear safety glasses while using compressed air.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

BRUSH INSPECTION AND LUBRICATION

At approximately 200 hours of use, take or send your tool to your nearest Authorized Porter-Cable Service Station to be thoroughly cleaned and inspected; worn parts replaced, when necessary; relubricated with fresh lubricant, if required; reassembled with new brushes; and performance tested.

Any loss of power before the above maintenance check may indicate the need for immediate servicing of your tool. DO NOT CONTINUE TO OPERATE TOOL UNDER THIS CONDITION. If proper operating voltage is present, return your tool to the Service Station for immediate service.

BELT REPLACEMENT

1.CAUTION: DISCONNECT SANDER FROM POWER SOURCE.

2.Remove back-up pad (see REVERSIBLE PAD).

3.Remove the old belt and clean the belt mounting area.

4.Position the new belt around pulley (A) Fig. 11, and start it onto the shoulder of the pad support (B).

5.Rotate the pad support as you “walk” the belt onto it (see Fig. 12).

6.Reassemble back-up pad (see CHANGING BACK-UP PAD).

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Double Insulated Important Safety Instructions Additional Safety Rules for Random Orbit Sanders Additional Safety Rules for Paint Removal Disposable Paper Masks are not AdequateMotor Replacement PartsExtension Cord Selection To Start and Stop Sander Operating InstructionsForeword Reversible PADINSTALLING/REMOVING Abrasive Disc Hook & Loop AbrasivePressure Sensitive Abrasive Dust CollectorHOW to Hold Sander PAD BrakeMaintenance Accessories Service and RepairsPORTER-CABLE Limited ONE Year Warranty Canadian PORTER-CABLE Delta Service Centers

335 specifications

The Porter-Cable 335 is a versatile and robust woodworking tool that has gained popularity among both amateur and professional woodworkers. Known for its reliability and performance, this electric hand-held sander is designed to deliver smooth finishes while being easy to operate.

One of the standout features of the Porter-Cable 335 is its powerful motor, which provides ample power for a variety of sanding applications. With a 2.5 amp motor, it effortlessly handles even the most demanding tasks, such as smoothing rough surfaces or finishing intricate details. This sander is equipped with a speed control feature, allowing users to adjust the RPM according to the material being worked on, ensuring optimal results every time.

This model integrates advanced technology to enhance user experience and efficiency. The unique dust collection system is noteworthy; it effectively captures dust and debris, keeping your workspace clean and ensuring that you can see your work unobstructed. This feature not only aids in maintaining a tidy work area but also promotes healthier working conditions by reducing airborne particles.

The ergonomic design of the Porter-Cable 335 is another characteristic that sets it apart. It features a comfortable grip that reduces operator fatigue during extended use, making it suitable for long sanding sessions. Additionally, its lightweight construction allows for easy maneuverability, enabling users to reach tight spaces and corners without hassle.

The sander also incorporates an easy-to-use sanding sheet clamp system. This feature simplifies the process of replacing sandpaper, allowing users to switch grits quickly without the need for additional tools. Consequently, this saves time and increases productivity, especially when working on projects that require multiple sanding stages.

Moreover, the Porter-Cable 335 boasts durability and resilience, thanks to its high-quality materials and construction. The tools are built to withstand the rigors of workshop environments, ensuring longevity and reliability.

In summary, the Porter-Cable 335 is an excellent choice for those seeking a reliable, versatile sander. With its powerful motor, advanced dust collection, ergonomic design, and user-friendly features, it is crafted to meet the needs of serious woodworkers and DIY enthusiasts alike. Whether finishing furniture, preparing surfaces for staining, or doing detailed sanding work, the Porter-Cable 335 is equipped to deliver exceptional results with every use.
Top Page Image Contents