Porter-Cable CPF23400S Grounding Instructions, Extension Cords, Lubrication, BREAK-IN Procedures

Page 9

GROUNDING INSTRUCTIONS

The air compressor is equipped with a cord having a grounded wire with an appropriate grounding plug. The plug must be used with an outlet that has been installed and grounded in accordance with all local codes and ordinances. The outlet must have the same configuration as the plug. See illustration. DO NOT USE AN ADAPTER.

IMPROPER GROUNDING CAN RESULT IN SEVERE ELECTRICAL SHOCK.

Inspect the plug and cord before each use. Do not use if there are signs of damage. Do not modify the plug that has been provided. If it does not fit the available outlet, the correct outlet should be installed by a qualified electrician.

If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.

EXTENSION CORDS

Use extra air hose instead of an extension cord to avoid voltage drop and power loss to the motor. If an extension cord must be used, be sure it is:

•A 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will accept the plug on the compressor.

•In good condition.

•No longer than 50 feet.

•12 gauge (AWG) or larger. (Wire size increases as gauge number decreases.)

10 AWG and 8 AWG may also be used. DO NOT USE 14 AWG or smaller.

ADDITIONAL REGULATORS AND CONTROLS

Since the air tank pressure is usually greater than that which is needed, a regulator is employed to control the air pressure ahead of any individual air driven device.

Separate air transformers which combine the function of air regulation, moisture and dirt removal should be used where applicable.

LUBRICATION

The bearings in this unit are sealed bearings which contain sufficient lubricant to last their lives. No other lubrication is required.

BREAK-IN PROCEDURES

Serious damage may result if the following break-in instructions are not closely followed.

This procedure is required before the air compressor is put into service (before the hose is installed), the check valve is replaced, or a complete compressor pump is replaced.

The procedure:

1.Make sure the pressure switch lever is in the "OFF" position.

2.Plug the power cord into the correct branch circuit receptacle.

3.Open the drain valve fully to permit air to escape and prevent air pressure build up in the air tank during the break-in period.

4.Move the pressure switch lever to "ON/AUTO". The compressor will start.

5.Run the compressor for 15 minutes. Make sure the drain valve is open and there is minimal air pressure build-up in tank.

6.After 15 minutes, close the drain valve.

7.Move the pressure switch lever to "ON/AUTO". The air receiver will fill to cut- out pressure and the motor will stop. The compressor is now ready for use.

9-ENG

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Side Stack Safety Guidelines Definitions Important Safety InstructionsRead and Follow ALL Instructions What can Happen HOW to Prevent IT Risk of Explosion or Fire What can Happen HOW to Prevent ITHazard Risk of BurstingRisk from Flying Objects What can Happen HOW to Prevent IT Risk to Breathing What can Happen HOW to Prevent ITRisk of Electrical Shock What can Happen HOW to Prevent IT Risk of Burns What can Happen HOW to Prevent IT Risk from Moving Parts What can Happen HOW to Prevent ITRisk of Falling What can Happen HOW to Prevent IT Risk of Property Damage When Transporting CompressorGlossary SpecificationsDuty Cycle Model noGK H Description of OperationInstallation and BREAK-IN Procedures Location of the AIR CompressorVoltage and Circuit Protection Grounding Instructions BREAK-IN ProceduresImproper Grounding can Result in Severe Electrical Shock Extension CordsMaintenance Operating ProceduresWear Safety Glasses While Using Compressed AIR Preparation for UseStorage Service and RepairsThis Warranty is not Transferable and does not Cover Limited Warranty

CPF23400S specifications

The Porter-Cable CPF23400S is a versatile and efficient portable air compressor designed for both professional and home use. With its robust construction and a powerful motor, this compressor is engineered to handle a variety of tasks, making it an essential tool for contractors, DIY enthusiasts, and those tackling home improvement projects.

One of the standout features of the CPF23400S is its impressive 3-gallon tank capacity, which provides a steady supply of air for various applications. This tank size strikes a balance between portability and performance, allowing users to take it to job sites or use it in workshops without the bulk and weight of larger compressors. The compressor operates at a maximum pressure of 135 PSI, ensuring that it can power a range of pneumatic tools, including nail guns, air wrenches, and inflators.

The CPF23400S is equipped with a 1.5-HP motor that delivers reliable performance while maintaining a relatively quiet operation, with noise levels typically around 68 decibels. This feature is particularly beneficial in settings where noise reduction is a priority, such as residential areas or indoor workspaces. Additionally, the compressor features an oil-free pump, which eliminates the need for regular maintenance and contributes to its ease of use. The oil-free design also allows for quick startup and operation, providing users with the ability to get their projects underway without delay.

Another noteworthy characteristic of the Porter-Cable CPF23400S is its lightweight and compact design. Weighing in at just around 36 pounds, it is easy to transport and store. The integrated handle and rubber feet enhance stability and mobility, enabling users to move it effortlessly from one location to another. Its compact form factor ensures it can fit into tight spaces, making it ideal for both indoor and outdoor tasks.

In terms of safety features, the CPF23400S includes a thermal overload protection system that prevents the motor from overheating, prolonging the lifespan of the unit. Overall, the Porter-Cable CPF23400S stands out in the market for its combination of portability, performance, and user-friendly features, making it a reliable choice for anyone in need of a portable air compressor. Its technological advancements and practical design make it a valuable addition to any toolkit, offering an excellent balance of power and convenience.
Top Page Image Contents