Personal Safety, Tools USE and Care, Service

PERSONAL SAFETY

1.Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3.Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch ON invites accidents.

4.Remove adjusting keys or switches before turning the tool ON. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

6.Use safety equipment. Always wear eye protection. Dust mask, non- skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOLS USE AND CARE

1.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

2.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

3.Do not use tool if switch does not turn it ON or OFF. A tool that cannot be controlled with the switch is dangerous and must be repaired.

4.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

5.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

6.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.

7.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

8.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SERVICE

1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.

6626 specifications

The Porter-Cable 6626 is a versatile and powerful tool designed for woodworking and cabinetry tasks, offering users an effective solution for precision and performance. This router is celebrated for its robust features and innovative technologies that enhance its usability, efficiency, and overall functionality.

One of the key features of the Porter-Cable 6626 is its 1.75 HP motor, which delivers ample power for various routing applications. This motor ensures that the tool can handle tough materials while maintaining a consistent performance level. Users benefit from the variable speed control, which ranges from 8,000 to 25,000 RPM. This feature allows for precise adjustments according to specific tasks, such as detailed edge work or deeper cuts.

The ergonomic design of the Porter-Cable 6626 contributes significantly to user comfort and control. The handle offers an easy grip, allowing for better maneuverability and reducing fatigue during prolonged use. Additionally, the tool incorporates a soft-start feature, which gradually ramps up the speed to reduce startup torque. This enables smoother operation and enhances safety, particularly for beginners.

Another important aspect of the Porter-Cable 6626 is its dual-mode switch, enabling both fixed-base and plunge routing. This flexibility makes it suitable for a range of applications, from simple edge trimming to complex inlays and professional-grade woodworking projects. The smooth plunge mechanism allows for precise depth adjustments, further enhancing its versatility.

The router also boasts a durable build, with high-quality materials that ensure longevity and reliability even in demanding environments. The precision-machined aluminum base provides stability and minimizes vibration, contributing to accurate routing outcomes.

Furthermore, the Porter-Cable 6626 features an integrated LED light, illuminating the workspace to enhance visibility and accuracy when working on intricate details. Compatibility with various router bits adds to its adaptability, ensuring users can achieve desired results across multiple applications.

In summary, the Porter-Cable 6626 stands out as a powerful and user-friendly router, equipped with advanced features that cater to both novice and seasoned woodworkers alike. Its combination of power, flexibility, and ergonomic design makes it an essential tool for anyone looking to achieve precision in their woodworking endeavors.