OES9138 Oscillating Edge Sander
The new oscillating edge sander from Powermatic is full of features to handle all your edge sanding needs. ■ The large 113/4" x 48" table travels a full 8" in vertical height to accommodate all parts from tall to small. It will also
tilt in — 5 degrees and out to 45 degrees for all the angles you need to run. ■ The cast iron platen is a generous 48" x 91/2" and covered with graphite for production sanding offering super support and cooler running to extend belt life. With 24 oscilla- tions per minute you can use the entire belt face without burning.
■A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with 2 sealed ball bearings for
FEATURE | BENEFIT | ||||||
3HP motor with 9" x 138" |
|
|
|
|
| ||
abrasive belt | Power to handle the largest work pieces | ||||||
|
|
|
|
|
|
|
|
Oscillates 24 cycles per minute | Keeps belt cleaner for longer abrasive | ||||||
|
|
| life and better finish | ||||
|
|
|
|
|
|
|
|
9" x 48" platen with graphite pad | Gives the largest work surface | ||||||
|
|
| in its class | ||||
|
|
|
|
|
|
|
|
Dual dust collection | Keeps work area clean and extends | ||||||
|
|
| abrasive life | ||||
|
|
|
|
|
|
|
|
Large 113/4" x 48" front work- |
|
|
|
|
| ||
table with 8" vertical travel and |
|
|
|
|
| ||
tilt from | Supports the largest work pieces | ||||||
and includes miter head for | at a comfortable work height and | ||||||
angle work | accommodates virtually any angle | ||||||
|
|
|
|
|
|
|
|
Big 18" radius end worktable |
|
|
|
|
| ||
has 6" vertical travel and tilts | Allows for any angle radius work at | ||||||
the optimum height | |||||||
|
|
|
|
|
|
|
|
Precision balanced 9" diameter |
|
|
|
|
| ||
drive drum and 4" diameter. |
|
|
|
|
| ||
Rubber coated idler pulley | Gives positive drive and rigid tracking | ||||||
|
|
|
|
|
|
|
|
Rugged bearing assisted | Fast belt changing and quick | ||||||
tensioning device | adjust tracking | ||||||
|
|
| |||||
Convenient on/off controls | Ease of use for operator | ||||||
|
|
|
|
|
| ||
Heavy duty oscillating gearbox |
|
|
|
|
| ||
and shaft | For long | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gold Standard Since 1921.
WMH TOOL GROUP
Belt changing is fast with the ball bearing tension lever — after changing belt, perfect tracking is restored.
Both tables tilt in and out and have complete vertical travel for maximum versatility.
The 3HP motor with large 9" diameter drive drum is perfectly balanced and pivots through the oscillation cycle on a massive shaft with double bearings for