Paxar 6094 operating instructions Replacing Fuses

Page 17

4. Troubleshooting

Replacing Fuses

If the fuses need replacing, you’ll need:

1A fuses for 120V and 100V. ...or...

.5A fuses for 220 and 240V.

When the charger is facing you, the fuse box is located on the left side of the charger beside the power switch.

1.Turn the power OFF and unplug the power cord.

2.Use the tip of a screwdriver or pen to open the fuse box.

3.Carefully pull the fuse box straight out. Fuses are attached, so be careful not to drop or jolt the fuses.

4.Check to see if the fuse(s) are blackened, or if the thin metal wire inside is broken.

5.Remove the old fuse(s) by pulling them from the casing as shown.

6.Insert the new fuse(s) into the casing.

7.Replace the fuse box, pushing until it snaps closed.

11

Image 17
Contents Operating Instructions Canadian D.O.C. Warning General Safety Precautions Important Safety InstructionsOperating Instructions Table of Contents Operating Instructions Charging Time OverviewConvenience Features Setting the Power Supply Installing the ChargerPower Selector Wall Mount Installation Power On Test Charging Handles Slow Flashing Quick Flashing Indicator Problems and Solutions TroubleshootingProblem Corrective Action Replacing Fuses Depth Inches 10 cm Weight with cord Lb 3.2 kg SpecificationsPage Toll Free