Wagan 2601 user manual Specifications

Page 7

Elite400W Pro Pure Sine Inverter by Wagan Tech®

SPECIFICATIONS*

Output Waveform: Pure Sine Waveform

Input: 10V–15V DC

Output: 120V AC

TrueRatedPower: 400 watts

Peak Surge: 800 watts

Efficiency: > 90%

Frequency: 60Hz

Total Harmonic Distortion (THD): < 3%

No load current draw: < 0.4A

Battery low alarm: 10.5V ± 0.5V DC

Battery low shutdown: 9.5V ± 0.5V DC

Over voltage shutdown: 15.0V–15.5V DC

Cooling fan is thermally controlled

AC output sockets: 2 US standard

USB Power Port: 2.1A, 5V ± 0.25V

Power switch AC Output ON/OFF control

Dimensions (body only): 7.1 in. × 4.1 in. × 2.0 in. (18.0 cm × 10.5 cm × 5.2 cm)

Net Weight (approximate): 1.7 lbs (0.77 kg)

*All specifications are typical at nominal line, half load, and 77ºF (25ºC) unless otherwise noted. Specifications are subject to change without notice.

11

www.wagan.com

Image 7
Contents User’s Manual Introduction Rear Panel Front PanelLoad Considerations Connecting the InverterDetermining Maximum Appliance Wattage Battery Clip Adapter Cord Up to 400 Watts Output Operating Issues Television and Audio Equipment SuggestionsDISPOSAL/RECYCLING of Inverter TroubleshootingSpecifications Wagan Corp. Limited Warranty REV20120418