Controls and Functions
| POWER SWITCH |
| ADJUSTABLE | |
35 WATT 6000 K |
|
|
| CARRY STRAP |
|
|
| ||
|
|
|
| |
METAL HALIDE |
|
|
|
|
BULB |
|
|
| CONVENIENT |
|
|
|
| |
|
|
|
| CARRY HANDLE |
|
|
|
| BATTERY STATUS |
|
|
|
| INDICATOR |
|
|
|
| PUSHBUTTON |
|
|
|
| CHARGING/POWER |
|
|
|
| ON INDICATOR |
|
|
|
| FULL CHARGE |
|
|
|
| INDICATOR |
TOUGH, DURABLE | ADJUSTABLE | AC CHARGING PORT | ||
| ||||
HOUSING |
|
| ||
| WORK STAND |
| ||
|
|
| ||
CHARGING THE BATTERY
The unit is delivered in a partially charged state. It must be fully charged prior to first use by using the 120 volt AC method.
After charging, disconnect the Adapter from the external power source, then disconnect the Adapter from the AC Recharge Port.
Note: Before charging/recharging the unit’s battery, make sure the power switch is in the OFF position.
120 VOLT AC AND 12 VOLT DC CHARGING ADAPTERS
120 Volt AC Charging/Recharging
Plug the supplied 120 Volt AC Adapter’s plug
into a standard North American outlet. Connect the adapter’s DC pin into the AC Recharge Port located on the side of the unit, next to the Battery Status Indicator. The Charging LED will light to indicate that the unit is charging. The Full Charge LED indicator will light green when the unit is fully charged.
Note: When the unit is not charging and the Power Switch is engaged, the Charging/ON LED will light blue.
12 Volt DC Charging/Recharging
FULL CHARGE | CHARGING/POWER |
INDICATOR | ON INDICATOR |
The DC recharging method will NOT recharge the unit as effectively as the 120 volt AC method. The 12 volt DC recharging procedure is recommended only when it is necessary, since frequent use of the 12 volt DC recharging procedure may shorten the battery system’s life.
1.Insert the end plug of the12 Volt DC Adapter plug into the vehicle’s 12 volt DC accessory outlet.
5