MAINTENANCE/REPLACEMENT Parts, Battery Replacement

VEC258 Manual 3/03.qxp 1/23/07 5:18 PM Page 11

4.Push the pins the new bulb into the socket and make sure the bulb is fully inserted.

5.Replace the lens and bezel.

6.Tighten (clockwise) the bezel until it is snug.

7.Test the light for proper operation by turning it ON and then OFF.

8.3FLUORESCENT LAMP REPLACEMENT

The bulb type is a standard 4 watt F4T5/D fluorescent tube type. A replacement bulb can be purchased from local lighting, hardware or camping stores. The fluorescent lamp tube can be replaced after the front vertical lens is removed. The procedure follows:

1.Remove the battery pack or DC adapter. Using a small Phillips screwdriver, unscrew (counterclockwise) the small screw at the top of the lens.

2.Slide the lens down from the top of the unit. The lens will come off. Set the lens aside.

3.Remove the fluorescent tube by turning one-quarter turn so pins at both ends of the tube are released from the sockets. The tube will come out.

4.Set the defective tube aside for proper disposal.

5.Put in a new tube, being careful to keep the bulb pins from bending.

6.Rotate the tube one-quarter turn to lock the pins into the sockets.

7.Check the new tube to make sure it is secure in the sockets.

8.Replace the lens, and slide it towards the top of the unit. The screw holes should align.

9.Replace the small screw and carefully tighten with the Phillips screwdriver.

10.Follow local ordinances for fluorescent bulb disposal and discard the old bulb.

9.MAINTENANCE/REPLACEMENT PARTS

For replacement parts (batteries, DC power adapters, AC charging adapters, cables, etc.), contact Vector technical support: (954) 584-4446 or toll free at (866) 584-5504. Periodically, cables, hose, nozzles, and connectors should be inspected for damage, corrosion, dust; and dirt. If surfaces are dirty, they can be wiped clean with a cloth moistened with water and a drop of detergent. Battery pack contacts can be wiped clean with a dry cloth.

10.BATTERY REPLACEMENT

The battery in the battery pack should be replaced with a new one when the operating capacity is reduced to about one half or the ability to inflate one and one half average sized automobile tires. Make sure that the battery is fully charged before determining that the battery pack should be replaced. Contact Vector technical support and ask for part VEC194. This battery pack is also used with other Vector products that include portable inflators and spotlights. For more details, please contact our technical support department toll free at (866) 584-5504.

11.BATTERY DISPOSAL

Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed of properly. Most states require recycling-contact your local municipal authority for information.

Non-spillable, sealed, lead-acid battery, must be recycled or disposed of properly. Recycling is required - contact your local authority for information. DISPOSAL QUESTIONS FOR USA CALL toll free (877)288-7722.

WARNINGS:

•Do not dispose of the battery pack in fire as this may result in an explosion.

•Before disposing of the battery pack, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in injury or fire). Failure to comply with local, state and federal regulations can result in fines, or imprisonment.

12.SPECIFICATIONS

FOR COMPRESSOR:
Battery	.12 volt, 3 Amp Hour, Non-spillable Sealed Lead-Acid
Compressor	. . . . . . . . . . . . . . . . . . . . . . . . . . .260 PSI Maximum
Weight	. . . . . . . . . . . . . . . . . . . . . . . . . . . .1.82 lbs (.90 kg)
Height w/battery . . .	. . . . . . . . . . . . . . . . . . . . . .11.25 inches (28.57 cm)
Width	. . . . . . . . . . . . . . . . . . . . . . . .4.0 inches (10.16 cm)
Length	. . . . . . . . . . . . . . . . . . . . . . . . . .7 inches (17.78 cm)

LANTERN LIGHT:

Quartz Halogen Bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15W, G4

Fluorescent Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F4T5/D

11		12

VEC258 specifications

The Vector VEC258 is a sophisticated vehicle diagnostic tool designed to cater to a wide range of automotive needs. Ideal for professional mechanics and DIY enthusiasts alike, the VEC258 stands out due to its combination of user-friendly features, advanced technology, and extensive vehicle coverage.

One of the main features of the VEC258 is its comprehensive diagnostic capabilities. It supports multiple protocols, ensuring compatibility with a variety of vehicle makes and models. This broad coverage allows users to perform diagnostics on OBD-II compliant vehicles, making it a versatile tool suitable for both older and newer vehicles. The device can access engine control units (ECUs) and retrieve fault codes, enabling mechanics to diagnose issues quickly and efficiently.

In addition to its diagnostic functions, the VEC258 comes with an intuitive interface that simplifies operation. The large, backlit display provides clear visibility, even in low-light conditions, while the menu-driven system is designed to be user-friendly, allowing users of all skill levels to navigate through the various functions with ease. The inclusion of a rechargeable battery ensures that the device can be used wirelessly, adding convenience to its operation.

The VEC258 also incorporates advanced features such as live data streaming, which allows users to monitor real-time vehicle data, including engine RPM, vehicle speed, and sensor readings. This functionality is essential for identifying performance issues and conducting more in-depth diagnostics. Moreover, the tool has the ability to reset service lights and perform various special functions, such as airbag and ABS system resets, which adds to its overall utility.

Another remarkable characteristic of the VEC258 is its robust build quality. Designed to withstand the rigors of an automotive workshop, the tool is both durable and portable. This design also includes protective features that safeguard against accidental drops and harsh working conditions.

Connectivity is another significant aspect of the VEC258. The device can be updated via USB, allowing users to access the latest software and vehicle data. This ensures that the tool remains relevant and effective as new vehicle models are released and new technologies emerge.

In summary, the Vector VEC258 is a powerful diagnostic tool for automotive professionals and enthusiasts alike. With its extensive vehicle coverage, intuitive interface, live data streaming capabilities, and durable construction, the VEC258 represents a significant advancement in automotive diagnostic technology, making it an essential tool for efficient and accurate vehicle maintenance and repair.