HALOGEN WORK
SPOTLIGHTS
Safety instructions
Danger of electrical shock!
•Only connect the Stand Halogen Floodlight to correctly installed wall sockets having a mains current of 220 - 240 V at 50 Hz.
•Unplug the Stand Halogen Floodlight from the socket if you notice any faulty operation and when you decide to clean it.
•Under no circumstances may the Stand Halogen Floodlight be immersed in liquids, or liquids be permitted to permeate into the housing.
Should liquids nonetheless gain entry into the appliance housing, immediately unplug the ap- pliance from the mains supply and arrange for it to be repaired by qualified specialists.
•Never touch the Stand Halogen Floodlight, power cable or plug with wet hands
•To unplug the appliance, always pull the plug from the socket, do not pull the cord itself
•Do not crease or crimp the power cable and place it in such a way as to prevent anyone from stepping on or tripping over it.
•To avoid the risk of injury, arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury.
•Separate your Stand Halogen Floodlight from the mains supply immediately after use.The appliance is only completely switched off after having been unplugged.
Danger of injuries
•If they have not previously been supervised or in- structed in its correct usage, do not allow indivi- duals (including children) to use the appliance whose physical, sensorial or mental abilities or lack of experience and knowledge hinder their safe usage of it if they have not previously been supervised or instructed in its correct usage.
•Inform children about the appliance and its potential dangers and that they should not play with it.
Attention
•Always remove the plug from electrical sockets before exchanging the halogen lamps.
•Allow the halogen lamps to cool before removing them.
•Switch the Stand Halogen Floodlight off only with the ON/OFF switch.
•Never touch the glass covering, the power cable or the metal housing whilst it is in operation. These parts of the appliance will become very hot during use.
To avoid burn injuries, do not touch these surfaces!
•Arrange for a defective glass cover to be imme- diately replaced by a suitable new one.
•Never direct the halogen floodlights towards each other. The appliance could be damaged by the large generation of heat.
•Always ensure that the Stand Halogen Flood- light is sufficiently distant from yourself and easi- ly meltable items.
•To avoid eye damage, do not look directly into the Stand Halogen Floodlight.
•Never place the Stand Halogen Floodlight in the close proximity of easily inflammable materials.
•Use exclusively halogen lamps up to 500 Watt.
•Never touch the lightbulb with bare hands. Always use a dry
•Read and observe all safety and operating instructions.
•Ensure that the Stand Halogen Floodlight has cooled down before storing it away.
- 2 -