NOTE: Never press the DISCHArge button while a NoMEM battery is inserted in the base module!
DISCHARGE / CHARGE MODE (for Ni-Cad type batteries)
Plug the appropriate power adapter into the base module hole marked "DC IN", and insert the battery to be charged. The RED CHARGE indicator should light. Press the DISCHARGE button at the top of the base module until the GREEN DISCHARGE light goes on. The GREEN light will stay on until the battery is fully discharged, then the RED indicator light will light indicating that the battery is now being charged. When the RED light goes out, your battery is fully charged.
DISCHARGE FOR STORAGE (for Ni-Cad type Batteries)
Plug the appropriate power adapter into the base module hole marked "DC IN". Next, insert your 6 Volt camcorder battery into the base module and press the DISCHARGE button on the top of the base module until the GREEN DISCHARGE indicator light goes on. The GREEN light will go out once the battery is fully discharged. The battery should be removed soon after the GREEN light goes out to prevent the battery from recharging automatically.
Using Your BCR261 As An Ac Power Source For Your Camcorder Connect the adapter plate provided to your camcorder in place of the battery. Plug either the AC Transformer or the DC adapter into the "DC IN" jack on the base module. Finally, plug one end of the double ended cable into the adapter plate on the camcorder, and the other end into the hole on the base module marked "output". You should now have power to your camcorder. If you do not have power, check the adapter plate on the camcorder for proper connection and that the interconnecting cable is fully inserted.
SPECIFICATIONS:
POWER SOURCE
•AC Adapter - Output 13.5 VDC - 1A
•12 Volt DC Cigarette Adapter - Not to exceed 15 VDC
CHARGING CIRCUIT
•Microprocessor Controlled Switching Type
CHARGING MODE
• | Current | 850mA Constant |
• | Time | 1 to 2 Hours (Varies With Battery Capacity |
|
| and Charge Condition) |
• | Detection | |
• | Protection | Max. Voltage, Time, and Temperature |
DISCHARGING MODE | ||
• | Current | 360mA +/- 20mA |
• | Cut Off | 1V / Cell |
POWER SUPPLY MODE OUTPUT | ||
• | Output | 10.8 Watts |
• | Voltage | DC 7.15V Regulated |
• | Current | 1500mA Max. |
“LIMITED” 1 YEAR WARRANTY
This limited warranty starts from the date of original purchase and expires 1 year thereafter. If, during this period, any part, because of manufacturing defects or workmanship fails to function properly under normal use will be repaired at no charge for parts and labor or, at our option, the product will be replaced. The following is excluded: damages from delay or loss of use of equipment, or damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs, modifications, or accident.
Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to:
LENMAR ENTERPRISES INC. USA , 31328 VIA COLINAS #102, WESTLAKE VILLAGE, CA 91362.
When sending in product for service, your package should include evidence of date and place of purchase. Enclose $10.00 for shipping and handling for addresses in the U.S. and $15.00 in Canada. For outside the U.S. and Canada, freight will vary depending upon ship to address.