Milwaukee 7150-21 manual Description of Part NO. REQ, Lubrication

49

50

51

87

	89
54	52

53

56 55

	65
64	73
	72

66

74

	88
62	91
	57

60

58

59

61

63

69

68 70

71

67

93 67 68 69

70 71 75

75

99

101

FIG.	PART NO.	DESCRIPTION OF PART	NO. REQ.
49	---------------	Driver Guide		1
50	05-83-0505	Half Round Hex Bolt (M4 x 0.7-12)		1
51	42-92-1405	Cover, Driver Guide B		1
52	42-92-1390	Cover, Driver Guide A		1
53	44-60-1865	Fixed Pin		1
54	45-88-1705	Lock Handle Grip		1
55	06-65-1450	Spring Pin		1
56	44-20-0855	Lock Handle Assembly		1
57	43-40-0465	Magazine A		1
58	05-84-0880	Bolt, SHC, M4 x 0.7-6		1
59	42-36-2045	Work Contact Element Stop Bracket		1
60	40-50-3090	Work Contact Element Stop Pin		1
61	44-60-1880	Work Contact Element Stopper Pin		1
63	42-18-0300	Magazine Bar		1
64	40-50-3215	Magazine Latch Spring		1
65	44-20-0865	Latch		1
66	05-59-2040	Lock Nut, M4 x 0.7		1
67	43-72-0375	Pusher		1
68	45-08-0465	Pusher Spring Shaft		2
69	40-50-3125	Pusher Spring		2
70	43-40-0500	Magazine B		1

FIG.	PART NO.	DESCRIPTION OF PART	NO. REQ.
71	06-65-1445	Spring Pin	1
72	44-50-0200	Latch Pin	1
73	44-90-0765	E-Ring	1
74	05-84-0890	Bolt M4 x 0.7-22	1
75	42-92-1470	Protecting Hood Cover	1
87	05-84-0840	Bolt Assembly	2
88	05-84-0810	Bolt M4 x 0.7-6	1
89	44-86-0700	Retainer	1
91	45-88-1730	Flat Washer	1
92	31-94-0105	Trigger Valve Assembly	1
93	45-24-0035	Magazine Assembly	1
99	12-98-0320	Service Nameplate	1
101 10-20-3310		Warning Label	1
	14-70-0130	Overhaul Kit (Not Shown)
	14-70-0195	Driver Maintenance Kit (Not Shown)

Lubrication:

Type I Grease 49-08-7100

Clean all parts with a dry, clean cloth.

2, 4,	5, 6, 7	Place a thin coating of grease into internal bore of top cap (2). Coat parts (4 – 7) and reassemble in order shown.
8, 9,	10	Coat o-ring (10) and piston ring (8) prior to installing into groove of driver assembly (9).
18, 20, 23, 24		Coat o-ring (13), cylinder spacer (15), o-ring (16) and cylinder ring (14) prior to installing onto cylinder (12).

21, 22 23, 24, 25, 26 27, Coat individual parts of the trigger valve assembly (21-27).

28 Note: Plunger cover (28) does not require lubrication.