READ ALL INSTRUCTIONS BEFORE OPERATING
SAVE THESE INSTRUCTIONS
Before attempting to operate your new Angle Grinder please read these instructions thoroughly. You will need these instructions for the safety warnings, precautions, assembly, operation, maintenance procedures, parts list and diagrams.
WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
TABLE OF CONTENTS |
| |
Description |
| Page # |
Warranty | 1 | |
Specifications | 1 | |
Safety rules | ||
Getting Started | 3 | |
Assembly | 3 | |
Operating Your Grinder | 4 | |
Tech Tips | 4 | |
Maintenance | 5 | |
Parts List and Diagram | 6 | |
SPECIFICATIONS |
|
|
Motor | 120V~ 60Hz – 8amp | |
No Load Speed | 11,000 RPM | |
Weight | 7 lbs | |
Overall Length | 16.5" | |
Spindle Thread | 5/8" - 11 UNC | |
SAFETY RULES
WARNING: The
1. Know your machine. Read this manual carefully. Learn the machine’s applications and limitations, as well as specific potential hazards peculiar to it.
2. Ground all machines. This machine is “Double Insulated,” meaning that all outside metal parts are insulated from electrical power. Double Insulated tools are equipped with a polarized plug. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not attempt to circumvent this safety feature.
1