Important Safety Instructions

WARNING: When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of personal injury, including the following:

READ AND FOLLOW ALL INSTRUCTIONS.

There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter- Cable and we have advised you.

1.USE SAFETY GLASSES. To prevent eye injuries, the tool operator and all persons in the work area must wear safety glasses with permanently attached, rigid, plastic side shields. These safety glasses must conform to ANSI Z87.1 requirements (approved glasses have “Z87” printed or stamped on them). Fig. 1.

2.WEAR EAR PROTECTION to safeguard against possible hearing loss. Fig. 1.

3.USE CLEAN, DRY, REGULATED com- pressed air at 70 to 120 PSI, (4.8 to 8.3 BAR). Fig. 2.

4.DO NOT CONNECT TOOL TO pressure which potentially exceeds 200 PSI (13.7 BAR).

Technical Service Manager

Porter-Cable Corporation

4825 Highway 45 North

P. O. Box 2468

Jackson, TN 38302-2468

Fig. 1

Fig. 2

5.ONLY USE AIR HOSE THAT IS RATED for a maximum working pressure of 150 PSI or 150% of the maximum system pressure, which ever is greater.

6.NEVER USE OXYGEN, CARBON DIOXIDE, combustible gases or any other bottled gas as a power source for this tool: explosion and serious personal injury could result. Fig. 3.

7.CONNECT TOOL TO AIR SUPPLY HOSE with a coupling that removes all pressure from the tool when the coupling is disconnected. Fig. 4.

Fig. 3

Fig. 4

894884-003, BN200A specifications

The Porter-Cable BN200A is a versatile and compact brad nailer, designed to meet the demands of both professional contractors and DIY enthusiasts. As part of Porter-Cable's renowned lineup, the BN200A combines precision, power, and user-friendly features, making it an excellent choice for a variety of woodworking and construction projects.

One of the standout features of the BN200A is its lightweight design. Weighing only about 2.5 pounds, this brad nailer is easy to handle, reducing user fatigue during extended use. Its compact frame allows for excellent maneuverability, making it particularly useful in tight spaces or when working on intricate projects.

The brad nailer is powered by an efficient electric motor, which provides dependable performance without the need for an air compressor or gas canister. This means that users can enjoy the flexibility of using the BN200A anywhere, with minimal setup time. Its capability to drive 18-gauge nails ranging from 5/8 inches to 2 inches in length adds to its versatility, enabling users to tackle a wide range of applications including trim work, cabinetry, and furniture assembly.

The BN200A features a tool-free depth adjustment system, allowing users to easily modify the nail depth for precise finish work. This is complemented by a clear plastic magazine that provides visibility to the nail supply, making it easy to monitor and reload when necessary. The quick-release jam clearing mechanism ensures that any nail jams can be resolved swiftly, minimizing downtime during projects.

Safety is also a prime consideration in the design of the BN200A. It comes equipped with a sequential firing mode, which allows for greater control during operation. Additionally, the integrated trigger lock helps prevent accidental firing, fostering a safer working environment.

Porter-Cable's BN200A is designed with durability in mind. Its robust construction can withstand the rigors of job site use, ensuring long-lasting performance. With a combination of features like an ergonomic grip, a lightweight build, and a reliable power source, the BN200A stands out as a top choice for those seeking a reliable and effective brad nailer for their projects. Whether you are a seasoned professional or a weekend warrior, the Porter-Cable BN200A is poised to deliver excellent results every time.