Loading the magazine

General safety advice for electrical power tools / Before use

and advice. Electrical power tools are dan- gerous when they are used by inexperienced people.

e)Look after the device carefully. Check that moving parts are working prop- erly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have dam- aged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools.

f)Keep cutting tools clean and sharp. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.

g)Use the electrical power tool, accesso- ries, inserted tools etc. in accordance with these instructions and advice, and the stipulations drawn up for this par- ticular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those in- tended can lead to dangerous situations.

Secure the workpiece. A workpiece held in a clamp or vice is kept more securely in place than one held by your hand.

Always work with the mains lead leading away from the rear of the device.

DANGER OF INJURY! Use the device with only the staples and nails speciﬁed above. Ensure that the staples or nails do not project from the surface of the workpiece or penetrate through to the other side.

Short-term operation time: Let the device cool down after 15 minutes of continuous operation. DANGER OF INJURY! Keep your ﬁngers and other body parts away from the front plate 7 . Never ﬁre staples or nails through the air. At short range the shot staples or nails could lead to serious injury.

Only soft materials such as wood or textiles should be joined using the device. Otherwise the device could be damaged.

CAUTION! Connect the device to the mains only when it is switched oﬀ. Set the ON / OFF switch 2 to position “0”.

WARNING! DANGER OF INJURY! Switch the device on just before you intend to use it. If you are not using the device, switch it oﬀ to prevent unintentional ﬁring.

Safety advice relating speciﬁcally to Electric nailer / staplers

DANGER OF INJURY! Never point the device at yourself or at oth-

er people or animals. Ensure that no people or animals are on the other side of the workpiece.

PROTECT YOUR EYES! Wear

protective glasses. This also applies to people who may be helping with the work by supporting or holding the workpiece.

Make sure the device is switched oﬀ before you load the magazine. Set the ON / OFF switch to position “0” and pull the mains plug out of the mains socket!

Do not use the device to ﬁx electrical cabling in place.

Before use

Squeeze the end of the magazine slider 4 (see Fig. A).

Pull the magazine slider 4 out of the magazine

5(see Fig. B).

Fill the magazine 5 with staples or nails (see Fig. C).

Note on filling with nails: Use the right- hand slot for ﬁlling with nails as shown in the detailed image in Fig. C. Ensure that the nail heads are all at the top.

NOTE: Observe the maximum capacity of ap- prox. 85 staples or approx. 75 nails when ﬁlling. After ﬁlling, push the magazine slider 4 into the magazine 5 as far as it will go until you hear and feel it engage.

GB/IE

PET 25 A1 specifications

The Parkside PET 25 A1 is an innovative tool that has garnered attention for its powerful performance and user-friendly features. Designed for both professionals and DIY enthusiasts, this versatile electric tool is perfect for a variety of tasks, including cutting, grinding, and polishing.

One of the standout features of the Parkside PET 25 A1 is its robust 250-watt motor, which provides ample power for heavy-duty applications. This motor ensures that the tool maintains its performance even under strenuous conditions, making it reliable for long-term use. The adjustable speed functionality allows users to tailor the operational speed to their specific needs, enhancing control and precision for a range of projects.

The ergonomic design of the Parkside PET 25 A1 is another highlight. It comes equipped with a comfortable grip that minimizes hand fatigue during extended use. This is particularly beneficial for professionals who rely on such tools for daily tasks. Additionally, the lightweight construction of the device makes it easy to maneuver, allowing for intricate work in tight spaces.

In terms of safety, the Pet 25 A1 is fitted with a protective guard that prevents accidental contact with the rotating attachments, ensuring that users can work without the constant worry of injury. The inclusion of a dust extraction feature helps to keep the work area clean and free from debris, promoting a safer environment.

The versatility of the Parkside PET 25 A1 cannot be overlooked. It is compatible with a variety of accessories, such as cutting discs, sanding pads, and polishing wheels. This adaptability allows users to switch tasks quickly and efficiently, making it an invaluable tool for a range of applications from woodworking to metalworking.

Moreover, the Parkside PET 25 A1 is designed with durability in mind. Made from high-quality materials, it withstands the wear and tear associated with regular use. The longevity of the tool is further enhanced by efficient heat dissipation, which prevents overheating and extends its lifespan.

In summary, the Parkside PET 25 A1 combines power, versatility, and safety to deliver a high-quality performance that meets diverse user needs. Whether you are a seasoned professional or a hobbyist, this electric tool is sure to become a reliable companion in your workshop. Its advanced technologies and thoughtful design make it a standout choice for anyone looking to tackle various projects with confidence and ease.