Preparing for use / Operation

Ensure that the disc guard cover 7 sits ﬁrmly on the spindle collar.

Attaching the auxiliary handle

CAUTION! For safety reasons this device must always be used with the auxiliary handle 6 in place. Otherwise you could become injured.

WARNING! DANGER OF INJURY! Pull the mains plug out of the mains socket before you carry out any task on the device.

Screw the auxiliary handle 6 on the left, right or on the top of the head of the device.

Attaching and replacing roughing / grinding / cutting discs

Take note of the dimensions of the roughing / grinding or cutting discs. The circular hole must ﬁt on to the mounting ﬂange without play. Do not use a reducer piece or adapter.

WARNING! DANGER OF INJURY! Pull the mains plug out of the mains socket before you carry out any task on the device.

Check the condition of the roughing / grinding or cutting discs. They must be free of damage, moisture or cracks. Otherwise they could break up during use and cause injury.

DANGER OF BURNS! Always wear protective gloves when changing a roughing / grinding or cutting disc.

Roughing / grinding and cutting discs become hot during use. Do not touch them until after they have cooled down.

NOTE: Always ensure the discs are free of dirt before use.

Use only abrasive consumables or tools with an allowable speed at least as high as the no-load speed of the device.

DANGER OF INJURY! Press the spindle lock button 11 only after the mounting spindle 14 has reached a standstill.

Press the spindle lock button 11 to block the drive. Release the clamping nut 13 using the spanner

17(see Fig. C).

Place the roughing / grinding or cutting disc on to the mounting ﬂange 15 with its labelled side facing towards the device.

Then replace the clamping nut 13 , with its raised side facing upwards, on to the mounting spindle 14 .

Press the spindle lock button 11 to block the drive. Tighten the clamping nut 13 again with the spanner 17 .

NOTE: Replace a new disc immediately if it runs unevenly or vibrates after being exchanged. After replacing a disc let the device run under no-load conditions for 30 seconds as a safety check. Look out for unusual noises or generation of sparks. Check that all the fastened-on parts are correctly attached.

Pay attention to see that the arrow showing the direction of rotation on the roughing / grinding or cutting discs (including diamond cutting discs) corresponds with the direction of rotation of the device (see arrow on the head of the device).

Operation

Switching on and oﬀ

Note: Always switch on the angle grinder before bringing it into contact with the workpiece material.

Switching on the device:

Press the safety lock-out 3 (see Fig. H). Then press the ON / OFF switch 2 .

Switching oﬀ the device:

Release the ON / OFF switch 2 .

Rotating the hand grip:

WARNING! DANGER OF INJURY! Pull the mains plug out of the mains socket before you carry out any task on the device.

The hand grip 1 can be rotated by 90° to the right or left (see Fig. A).

GB/IE/CY

PWS 230 SE specifications

The Parkside PWS 230 SE is a versatile and powerful tool designed for both professionals and DIY enthusiasts who prioritize efficiency and performance in their woodworking projects. Equipped with a robust 2300W motor, this tool provides ample power to handle a variety of materials, making it suitable for tasks ranging from precision cutting to heavy-duty applications.

One of the standout features of the Parkside PWS 230 SE is its variable speed control. This allows users to adjust the speed according to the material being worked on, ensuring clean cuts and optimal results. With a speed range of 800 to 2800 revolutions per minute, users can easily switch between different applications, whether it be slow, controlled cuts in softer woods or faster, more aggressive cuts in denser materials.

Designed with user comfort in mind, the Parkside PWS 230 SE incorporates an ergonomic handle that provides a secure and comfortable grip. This is particularly beneficial for prolonged use, reducing fatigue and ensuring better control. The tool also features a lightweight construction, making it easy to maneuver and handle across various projects.

A notable technological advancement included in the Parkside PWS 230 SE is its integrated dust extraction system. This feature helps keep the work area clean by minimizing sawdust and debris, which is essential for both visibility and safety. The tool can be connected to a vacuum system or utilized with a dust bag, providing flexibility for different working environments.

Safety is also a priority in the design of the Parkside PWS 230 SE. It comes equipped with a safety guard and a blade brake system, which ensures that the tool can be quickly stopped in case of an emergency, preventing accidents and injuries. Additionally, the saw's base is designed to provide stable support during operation, enhancing precision and safety during use.

With a maximum cutting depth of 85mm in wood and a tiltable base for angled cuts, the Parkside PWS 230 SE is well-suited for intricate woodworking tasks and furniture making. Its robust construction and user-friendly features make it a top choice for anyone looking for a reliable and powerful saw for their projects.

Overall, the Parkside PWS 230 SE stands out in the market for its combination of power, versatility, and user-centric design, making it a valuable addition to any tool collection.