Grizzly G0469, G0466 Line Pressure Regulation, To control the air supply to your tool

Page 14

6.Close the drain valve (Figure 5) to allow the tank to build up pressure.

Figure 5. Drain valve.

7.Check the tank pressure gauge (Figures 6 and 7) to see that the tank pressure climbs to approximately 115- 120 PSI (around 8 BAR) and turns OFF.

Note: If the compressor does not turn OFF at 120 PSI, flip the ON/OFF switch to OFF before the pressure reaches the maximum PSI shown on Page 3. See Pressure Switch on Page 22 to adjust the automatic shut-off.

Line Pressure Regulation

The air tool that you attach to the air compressor should have a preferred PSI operating level. Set the pressure to be delivered to the tool according to the required level of the tool.

To control the air supply to your tool:

1.Adjust the air control knob, shown in Figure 8, to set the PSI that will be delivered to your tool. Turn the knob clockwise to increase the pressure or counterclockwise to decrease the pres- sure.

Air Control

Knob

Lock Ring

Line

Tank

Pressure Pressure

Figure 6. G0466 Pressure gauges.

Tank

Line

Pressure Pressure

Figure 8. Tool air control knob.

2.Rotate the lock ring shown in Figure 8 against the bottom of the air control knob to prevent changes in the air pres- sure.

Figure 7. G0469 Pressure gauges.

 

-12-

Model G0466/G0469 Air Compressors

Page 13 Page 15
Image 14
Page 13 Page 15
Contents AIR Compressor Page Table of Contents Introduction Foreword Contact InfoMachine Data Sheet Safety Mation about proper operation of the equipmentModel G0466/G0469 Air Compressors Additional Safety Instructions For Air Compressors Amperage Draw Circuit Requirements110V Operation Circuit RequirementsGrounding Extension CordsUnpacking SET UPAssembly To assemble the air compressorPlacement To start the air compressor Operation Safety StartingOperations Line Pressure Regulation To control the air supply to your toolConnecting Tools To connect air tools to your air com- pressorWhen storing your air compressor, fol- low these guidelines StorageDaily MaintenanceSchedule WeeklyMonthly Pressure Safety ValveDraining Tank QuarterlyMaintenance Notes DateSymptom Possible Cause Possible Solution ServiceTroubleshooting See Changing Oil Check ValveFixing Air Leaks To find air leaksPressure Switch Pressure adjustment screwsService Notes G0466 Parts Breakdown G0466 Parts List DescriptionG0469 Parts Breakdown G0469 Parts List REF DescriptionWarranty and Returns Warranty Card Name Street CityStateZip BOX BELLINGHAM, WA

G0466, G0469 specifications

Grizzly Industrial has become a renowned name in the woodworking machinery sector, and among its impressive lineup are the Grizzly G0469 and G0466 models. These machines exemplify power, precision, and versatility, making them excellent choices for both amateur woodworkers and seasoned professionals.

The Grizzly G0469 is specifically designed as a heavy-duty band saw. It features a robust 1.5 HP motor that delivers ample power for cutting through dense hardwoods and softwoods. The machine boasts a cast iron frame that ensures stability during operation, minimizing vibrations for smoother cuts. One of the standout features of the G0469 is its large cutting capacity, allowing users to work with materials up to 12 inches high and 13 inches wide. This capacity makes it suitable for a variety of projects, from furniture making to intricate woodworking.

Additionally, the G0469 incorporates a quick-release blade tension system, which enables operators to change blades efficiently and save valuable time on their projects. With an adjustable blade guide system, users can maintain precision and accuracy in their cuts, increasing the overall quality of the finished product. The machine also comes equipped with a built-in LED work light that illuminates the cutting area, ensuring clear visibility and enhancing safety during operation.

On the other hand, the Grizzly G0466 is a top-of-the-line table saw that focuses on delivering precision and ease of use. This model is powered by a 3 HP motor, making it capable of tackling various cutting tasks with remarkable efficiency. The table saw features a large cast iron table that provides a stable surface for workpieces, along with an extension table that increases overall workspace for larger projects.

A notable characteristic of the G0466 is its accurate 30-inch fence system, which allows for easy adjustments and ensures straight cuts. Furthermore, the saw includes a riving knife feature, which enhances safety by preventing kickback during operation. The machine’s dust collection port also aids in maintaining a clean work environment, efficiently capturing sawdust and debris generated during use.

Both the G0469 and G0466 are designed with user-friendliness in mind. They blend advanced technologies with traditional craftsmanship, providing woodworkers with reliable machines that enhance productivity and creativity. Whether you choose the powerful band saw or the precision table saw, Grizzly’s commitment to quality is evident, making these models a solid investment for anyone serious about woodworking.
Top Page Image Contents