Grizzly DD7542 instruction sheet Introduction, Inventory Figure, Operation Safety

Auto Darkening

Welding Helmet

MODEL H7786

INSTRUCTION SHEET

Welding helmets do not provide unlimited protection for your eyes, ears and lungs. Personal injury could result from using this welding helmet without proper protec- tive gear. Always wear safety glasses, an approved respirator, and hearing protection while welding.

Introduction

This Auto Darkening Welding Helmet features a reaction time of 2ms, 2 sensors, variable shades from 9-13, adjustable delay from 0.1-1.0 seconds, a view area of 11⁄4" x 31⁄4" and a weight of 19 oz. Along with those features, the headgear is fully adjustable and is supplied with a sweat band.

Inventory (Figure 2)
A.	Welding Hood	1
B.	AAA size Batteries	2

Operation Safety

Welding produces ultraviolet and infrared rays that are harmful if skin or eyes are left unprotected.

•Use a welding helmet that is supplied with the correct shade filter to protect your eyes and face while welding or watching a welding process. Refer to the Shade and Sensitivity charts on page 4.

•Wear safety glasses with sides shields or goggles under the welding helmet.

•Wear protective clothing that is fire resistant like leather or wool. DO NOT wear tennis shoes or street shoes while welding. Wear leather boots that come up past the ankles and have fire resitant soles.

•Protect those around you from welding flash and fire by using protective barriers or screens.

•Remove any flammable materials in the area before you begin to weld.

•Have someone perform fire watch while you are welding and for at least an hour after you have finished welding, to guard against fire.

•DO NOT weld if the welding helmet is dam- aged. Inspect it carefully and replace compo- nents as needed. Make sure the clear protec- tive lense is not scratched or covered with smoke as it may impede the sensors, causing the auto darkening feature to malfunction and expose the operator.

•Never use the welding helmet to look at the sun. The welding helmet is designed for use while welding, only.

•DO NOT perform overhead welding using this welding helmet. Dripping metal could damage the auto darkening lense resulting in its malfunction, exposing the operator.

•DO NOT grind while wearing the helmet. The helmet and/or lense may become damaged and malfunction.

COPYRIGHT © SEPTEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#DD7542 PRINTED IN CHINA