DANGER OF FIRE FROM FLYING SPARKS! Do not use any form of dust extraction (dust box 5
or vacuum extraction device) if you are sanding metal.
Connection:
jPush the adapter for external vacuum extraction 12 into the adapter port 9 . If it is necessary to use the reducer piece 13 , push the reducer piece into the adapter for external vacuum ex- traction 12 .
jSlide the hose of a suitable dust extraction de- vice approved for that purpose (e.g. a workshop vacuum cleaner) on to the adapter for external vacuum extraction 12 with the reducer piece 13 , if used.
Removal:
jPull off the dust extraction device hose.
jPull off the adapter for external vacuum extrac- tion 12 (with the reducer piece 13 , if used).
QOperation
QSwitching on and off
When operating the belt sander you can select between intermittent or continuous operation mode.
To switch on intermittent operation mode:
jPress the ON / OFF switch 3 .
To switch off intermittent operation mode:
jRelease the ON / OFF switch 3 .
To switch on continuous operation mode:
jPress the ON / OFF switch 3 , and keep it pressed, then press the locking knob 4 .
To switch off continuous operation mode: j Press and then release the ON / OFF switch 3 .
Preparing for use / Operation
QSelecting the correct rotational speed and sanding belt
You can select the belt speed using the belt speed adjuster wheel 1 even whilst the sander is running. The optimum belt speed depends on the workpiece and the workpiece material. Always confirm the best speed by carrying out a small test. The follow- ing table lists some recommended values to help you determine the optimum speed.
Material / type of | Softwood |
work |
|
Coarse finish | 60 |
(Grit grade) |
|
Fine finish (Grit grade) | 240 |
Preselected rotation | high |
speed |
|
Material / type of | Hardwood |
work |
|
Coarse finish | 60 |
(Grit grade) |
|
Fine finish (Grit grade) | 180 |
Preselected rotation | high |
speed |
|
Material / type of | Chipboard |
work |
|
Coarse finish | 60 |
(Grit grade) |
|
Fine finish (Grit grade) | 150 |
Preselected rotation | high |
speed |
|
Material / type of | Removing paint / |
work | varnish |
Coarse finish | 60 |
(Grit grade) |
|
Fine finish (Grit grade) | |
Preselected rotation | high |
speed |
|
GB/IE/CY
11