Harbor Freight Tools 97525 operating instructions Maintenance, Parts List, Part Description

Maintenance

Warning! Always disconnect the tool from the air compressor and then empty the magazine of nails or staples before attempting to inspect or perform maintenance to the Nailer/ Stapler.

1.Inspect all of the nuts and screws and make sure they are securely fastened.

2.Periodically lubricate the driving mechanism and magazine with a light oil. Wipe down with a clean cloth. Never use gasoline or flammable solvents to clean the tool.

3.Inspect your air compressor according to manufacturer’s instructions.

Warning! If you detect any air leaks, power loss, the Nailer/Stapler skips driving, drives too deep, or not deep enough, take the Nailer/Stapler to a qualified service technician.

Parts List

Part	Description	Part	Description	Part	Description
1	Exhaust Deflector	44	Hex Bolt	71	Cylinder Pin
3	Hex. Bolt	45	Stopper	72	Magazine Tail Cover
4	Head Cap	46	Compression Spring	73	Lock Nut
5	Seal	47	Safety Cover	74	Hand Grip
6	Internal Lining	48	Safety Cover Bolt	75	O-ring
7	O-Ring	49	Spacer	76	End Cap
8	Compression Spring	50	Driver Cover	77	Air Plug
9	Gasket	51	Hex. Bolt	78	Collar
10	O-Ring	52	Driver Guide	79	Fixed Ring
11	Head Valve Piston	53A	Magazine B	80	O-Ring
12	O-Ring	54	Steel Bar	81	Ling Ring
13	O-Ring	55	Pusher Unit	82	O-Ring
14	O-Ring	56	Spring Holder	83	Cylinder
16	O-Ring	58	Spring	84	Ling Ring
17A	Piston & Driver	59	Spring Washer	85	Bumper
25	Body	60	Hex Bolt	86	Seal
26	Nozzle	61	Magazine A	87	Trigger Valve Upper
34	Spring	62	Magazine Bracket	88	Spring
36	Spring Pin	63	Hex Bolt	89	O-Ring
37	E-Ring	64	Hex Bolt	90	Trigger Plunger
38	Trigger	65	Lock Nut	91	Trigger Plate
39	Pin	66	Retainer Pin	92	Trigger Valve Lower
40	Safety Guide	67	Latch	93	Trigger Plate
41	Spring Pin	68	Spring
42	Safety	69	O-Ring
43	Non-Marking Tip	70	Hex Bolt

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 97525 For technical questions, please call 1-800-444-3353. Page 9