Heat Pump Wall-Mount Model Nomenclature

MODEL NUMBER l

CAPACITY

- 1½ Ton

VOLTS & PHASE

- 2 Ton

REVISION l

COLOR OPTIONS

A - 230/208/60/1

- 2½ Ton

X - Beige (Standard)

B - 230/208/60/3

- 3 Ton

1 - White

C - 460/60/3

- 3½ Ton

SPECIALTY PRODUCTS 2

- Mesa Tan

- 4 Ton

(Non-Standard)

- Buckeye Gray

- 5 Ton

- Desert Brown

VENTILATION OPTIONS

- Dark Bronze

(See Table Below)

CONTROL MODULES

(See Chart Below)

COIL OPTIONS

X - Standard

1 - Phenolic Coated Evaporator

2 - Phenolic Coated Condenser

3 - Phenolic Coated Evaporator

and Condenser

FILTER OPTIONS

X - 1 inch Throwaway (Standard)

W - 1 inch Washable

P - 2 inch Pleated

1 For 0KW and circuit breakers (230/208 volt) or toggle disconnects (460 volt) applications, insert 0Z in the KW field of the model number. 2 Insert “D” for dehumidification with hot gas reheat. Reference Form F1743 for complete details.

OUTLET OPTIONS X - Front (Standard) T - Top (on WH30 and

WH36 Models)

Ventilation Options

MODELS	WH184, WH242		WH301, WH361		WH421, WH483, WH602
Description	Factory Installed	Field Installed	Factory Installed	Field Installed	Factory Installed	Field Installed
Description	Code No.	Part No.	Code No.	Part No.	Code No.	Part No.
	Code No.	Part No.	Code No.	Part No.	Code No.	Part No.
Barometric Fresh Air Damper - Standard	X	BFAD-2	X	BFAD-3	X	BFAD-5

Blank-Off Plate	B	BOP-2	B	BOP-3	B	BOP-5

Motorized Fresh Air Damper	M	MFAD-2	M	MFAD-3	M	MFAD-5

Commercial Ventilator - Spring Return w/Exhaust	V	CRV-2	V	CRVS-3	V	CRVS-5

Commercial Ventilator - Power Return w/Exhaust	---	---	P	CRVP-3	P	CRVP-5

Economizer (Internal) - Fully Modulating	E	EIFM-2B	E	EIFM-3C	E	EIFM-5C

Energy Recovery Ventilator - 230 Volt	R	WERV-A2B	R	WERV-A3C 1	R	WERV-A5C 1

Energy Recovery Ventilator - 460 Volt	R	WERV-C2B	R	WERV-C3C 1	R	WERV-C5C 1

1 Intake and exhaust can be independently adjusted.

Heat Pump Control Modules

Factory Installed	Field Installed		Description
Code	Part	Low Pressure	Low Ambient Control	Start Kit	Outdoor
Number	Number	Low Pressure	Low Ambient Control		Outdoor
Number	Number	Control 1	and Relay		Thermostat
		Control 1	and Relay		Thermostat
B	CMH-3

E	CMH-7

O	CMH-9

Q	CMH-14

R	- - -

S	- - -

T	- - -

P	CMC-15

U	- - -

1The low pressure control is auto reset. It includes a lock-out feature and is resettable from the wall thermostat. All low pressure controls use a timed bypass circuit

to prevent nuisance tripping during low temperature start-up.

2The low ambient control includes an 8201-008 (fan relay) and permits cooling operation down to 0°F.

3For WH242-A, WH301-A, WH361-A and WH421-A models. The CMC-15 can be used with any control module combination. NOTE: The compressor anti-cycle relay is standard on all heat pump models.

4The outdoor thermostat is adjustable from 0°F to 50°F. It is suitable for use as a compressor cut-off thermostat.

BARD MANUFACTURING CO. BRYAN, OHIO 43506 www.bardhvac.com

Due to our continuous product improvement policy, all specifications subject to change without notice.

Before purchasing this appliance, read important energy cost and efficiency information available from your retailer.

Form No.

S3210

February, 2006

Supersedes S3210-106

Form No.	S3210-206
Supersedes	S3210-106
Page	12 of 12

Bard WH Series manual Heat Pump Wall-Mount Model Nomenclature, Ventilation Options