Bringing into use / Maintenance and cleaning / Service / Warranty
jLower the clamping lever 13 to tension the saw blade 7 .
jTurn the clamping lever 13 horizontally clock- wise to increase the tension.
jTurn the clamping lever 13 horizontally anti- clockwise to reduce the tension.
NOTE: Sawing with too little tension in the saw blade 7 can lead to inaccurate results.
Removing the saw blade 7 :
jLift up the clamping lever 13 .
jPress the top saw blade mount 8 downward.
jLift the saw blade 7 slightly.
jUnhook the saw blade out of the bottom saw blade mount 14 by moving it forward.
QMaintenance and cleaning
QMaintenance
Warning! DANGER OF INJURY!
Pull the mains plug out of the socket before you carry out any task on the device,
The device requires almost no maintenance.
QCleaning
jClean the device frequently; for best results, do this immediately after you have finished using it.
jDo not allow any liquids to enter the device. Use a dry cloth to clean the device.
jKeep the ventilation slots free of dust and dirt.
jDo not under any circumstances use petrol or strong solvents.
jStore the device in a dry room.
QService
J
Warning! Have your device repaired at the service centre or by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.
J
Warning! If the plug or lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use.
QWarranty
This appliance is guaranteed for 3 years from the date of purchase. It has been care- fully produced and
The warranty covers only material or manufactur- ing faults, not normal wear or damage to fragile parts such as switches or rechargeable batteries. The appliance is intended solely for private, not commercial, use.
If this product has been subjected to improper or in- appropriate handling, abuse, or interventions not carried out by one of our authorised sales and service outlets, the warranty will be considered void. This warranty does not affect your statutory rights.
GB
DES Ltd Units
Bilston Industrial Estate Oxford Street Bilston (Great Britain) WV14 7EG
Tel.:
Fax:
GB/IE/CY 11