| Specifications |
Pin Size | 23 Gauge, 1/2” to 1” long, Headless pins |
Magazine Capacity | 100 |
Operating PSI | |
Air Inlet Size | 1/ ” NPT Male |
| 4 |
Safety Feature | Single Sequential Safety Trip Mechanism |
Accessories | Two Hex Wrenches, Lubricating Oil, |
| 1,500 Fasteners: 500 each - 5/8”, 3/4”, & 1” Pins |
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Do not expose to rain. Keep work area well lit. Do not use electrically powered tools in the presence of flammable gases or liquids.
3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses.
4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
5.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.
7.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses.
8.Stay within air pressure capacity. Never operate the Nailer above 90 PSI.
9.Hold tool away from head and body. During operation the Nailer may kick back causing injury.
SKU 93656 | For technical questions, please call | Page 2 |