Harbor Freight Tools 91494 operating instructions Unpacking, Assembly and Operating Instructions

Page 10

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts List on page 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

ASSEMBLY AND OPERATING INSTRUCTIONS

NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 14.

Apply Pressure Here

FIGURE 1

Power Cord (7)

Trigger (13)

Lever (29)

Fastener Window

Nose (19)

Magazine (22)

Safety (21)

Warning: This Nailer / Stapler is not suited for nailing or stapling into concrete, masonry, bricks, or metal.

Warning! Do not fire if Brad Nails or Staples are jammed in the Nose (19) section. Unplug the unit and follow the “Removing Jammed Staples or Brad Nails” on page 12.

SKU 91494

For technical questions, please call 1-800-444-3353.

Page 10

Image 10
Contents For technical questions and replacement parts, please call Electric Nailer / StaplerSave this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Personal SafetyTool USE and Care SKU For technical questions, please callSpecific Safety Rules ServiceSKU For technical questions, please call Grounding Grounded Tools Tools with Three Prong PlugsSee Figure C, next Extension CordsDouble Insulated Tools Tools with TWO Prong Plugs See Figure CSymbology Extension Cord LengthAssembly and Operating Instructions UnpackingTesting the Sequential Trip Safety Mechanism Loading Brad Nails and Staples See Figures 2 and 3 belowOperating Instructions INSPECTION, MAINTENANCE, and CleaningRemoving Jammed Staples or Brad Nails Parts List Please Read the Following CarefullyAssembly Diagram