Harbor Freight Tools 93257 operating instructions Loading Coil Nails, Figure C

Page 7

3.Connect the air supply to the tool at the Air Plug (82-not included). Set the regula- tor at the recommended 70 to 125 operating PSI. Do not exceed the maximum 125 PSI.

4.Test the tool by depressing the Safety (38) against a piece of scrap wood without pulling the Trigger (60). The tool must not cycle (fire). If it cycles (fires), stop immediately and have it repaired by a qualified service technician.

(See Figure B.)

5.Hold the tool away or off the workpiece. The Safety (38) of the tool should return to its original position. Squeeze the Trigger (60). The tool should not cycle (fire). If the tool cycles (fires), stop immediately and have it repaired by a qualified service technician. (See Figure B.)

6.Depress the Safety (38) against the workpiece and squeeze the Trigger (60). The tool must cycle (fire) only once. Release the Trigger and squeeze it again. The tool must not cycle (fire). With the Trigger held, carefully lift the Nailer and press it against the scrap wood again. The tool must not cycle (fire). If it fails to perform in the manner explained in bold, have it repaired by a qualified service technician. (See Figure B.)

LOADING COIL NAILS

WARNING: Always wear ANSI approved impact safety goggles when reloading or performing any other maintenance on this tool. Other people in the work area must also wear ANSI approved impact safety goggles.

WARNING! Make sure the Nailer is not attached to the air hose when loading the tool.

1.To open the Magazine Cover (91), press down on the Latch (57) and swing the Door (32) open. Then, swing the Magazine Cover open. (See Figure C.)

MAGAZINE COVER

(91)

LATCH

(57)

DOOR

FIGURE C

(32)

 

 

Rev 11/06; REV 12/06

SKU 93257

For technical questions, please call 1-800-444-3353

PAGE 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents For technical questions, please call Coil Siding NailerSKU For technical questions, please call Product SpecificationsSafety Warnings and Precautions Save this ManualSKU For technical questions, please call SKU For technical questions, please call Unpacking California Health & Safety Code 25249.5, et seqOperation Testing the Full Sequential Safety Trip MechanismSee Figure B Figure C Loading Coil NailsSee Figure D Operating the NailerFigure E See Figure EClearing Jams Anytime any maintenance or repairs are done, First INSPECTION, MAINTENANCE, and CleaningSee Assy. Diagram Please Read the Following Carefully TroubleshootingDescription Parts ListAssembly Diagram

93257 specifications

Harbor Freight Tools 93257 is a versatile and innovative tool that has gained recognition among DIY enthusiasts and professional craftsmen alike. This multi-functional device is designed for a wide range of tasks, making it a valuable addition to any workshop or job site.

One of the standout features of the Harbor Freight Tools 93257 is its powerful motor. Designed to deliver consistent performance, the motor ensures that users can tackle tasks ranging from simple household repairs to more complex projects with ease. The device's adjustable speed settings allow for precise control, enabling users to match the tool's performance to the requirements of the job at hand.

Another notable characteristic of the 93257 is its ergonomic design. The tool is crafted with user comfort in mind, featuring a comfortable grip that minimizes hand fatigue during extended use. This design element is particularly beneficial for those who spend long hours working on various projects, as it enhances overall productivity and efficiency.

In addition to its comfort, the Harbor Freight 93257 is equipped with advanced safety features. These include a protective guard that shields the user from debris and a convenient power switch that ensures easy access. Such safety measures are essential in a workshop environment where tools are frequently used and can pose risks without the right precautions.

The Harbor Freight Tools 93257 is also known for its durability and longevity. Constructed with high-quality materials, this tool is built to withstand the rigors of daily use. Whether it's intensive woodworking or metalworking tasks, users can rely on the tool to perform consistently over time, making it a cost-effective choice for both hobbyists and professionals.

Moreover, the 93257 benefits from Harbor Freight's commitment to value. Priced competitively, this tool provides an excellent balance between quality and affordability, allowing individuals to invest in reliable equipment without stretching their budgets.

In conclusion, the Harbor Freight Tools 93257 combines power, comfort, safety, durability, and value, making it an essential tool for anyone looking to enhance their workshop capabilities. Whether you are a weekend warrior or a seasoned pro, this versatile tool promises to deliver the performance needed to complete your projects with ease and efficiency. Whether tackling a weekend project or a professional job, the Harbor Freight Tools 93257 is a compelling choice that meets the diverse needs of modern craftsmen.
Top Page Image Contents