Global Machinery Company LS1620 Introduction, Environmental protection, Description of symbols

Page 3

Introduction

Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.

You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire Instruction Manual before using your new GMC Power Tool. Take special care to heed the Cautions and Warnings.

Your GMC power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Environmental protection

Recycle unwanted materials instead

of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.

WARNINGS

It may be more difficult to see the laser line in conditions of bright sunshine and on certain surfaces.

Description of symbols

The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.

Wear hearing protection. Wear eye protection. Wear breathing protection.

Conforms to relevant standards for electromagnetic compatibility.

Specifications

Nominal voltage:

230–240Vac ~ 50Hz

Power:

200W

Speed:

400–1600 SPM

Depth of cut:

50mm

Stroke length:

20mm

Blade length:

127mm

Blade change:

Tool-free

Bevel angle:

0° to 45° left and right

Throat depth:

405mm

Laser class:

II

Laser wavelength:

650nm

Laser output power:

≤1mW

3

Image 3
Contents 200W Variable Speed Scroll SAW with Redeye Contents Environmental protection Description of symbolsSpecifications IntroductionGeneral safety instructions Safety rules for laser lightsRemove adjusting keys and wrenches Additional safety rules for scroll sawsAccessories AssemblyUnpacking Know your product Removing blades Mounting the saw to a workbenchBlades Selecting the correct bladeInstalling blades Setting the table for horizontal or bevel cuttingAligning the degree scale pointer LED light Adjusting the laser lineTurning on and off Sawdust blowerAdjusting the speed Selecting the correct speedScroll saw operation Oiling the arm bearings Using the Redeye laser line generatorMaintenance CleaningRepairs General inspectionPage Page GMC customer assist