Nails, To operate your nailer in single fire mode

The nailer is designed to fire one nail at a time, or one after another, using the safety yoke mechanism.

To operate your nailer in single fire mode:

1.Depress the safety yoke mechanism against the workpiece.

2.Pull the trigger, then remove your finger from the trigger after the nail is driven.

1.Pull the trigger.

2.Press the safety yoke mechanism against your workpiece and raise it after the nail is driven.

3.Hold the trigger and repeat Step 2 to drive more nails.

-10-

A jammed nail must be cleared before using the nailer again. The two places where a nail can get jammed are the maga- zine and the discharge area.

To clear a jammed nail from the maga- zine:

2. Pull back and lock the magazine push- er.

3.Remove the nail stick.

4.Locate and remove the jammed nail with needle nose pliers. Release the catch lever and let the pusher slide to front of the magazine.

To clear a jammed nail from the dis- charge area:

2.Pull back and lock the magazine push- er in place.

3.Remove all nails from the magazine.

4.Locate the nail in the nailer nose, dis- lodge the nail with a tool that will fit in the slot on the underside of the nose.

5.Throw the damaged nail away and insert a new nail stick that only con- tains clean, undamaged nails. DO NOT use dirty or damaged nails!

6.Release the catch lever and let the pusher slide to the front of the maga- zine.