Grizzly h8234 owner manual Adjusting Depth, To adjust the depth

Page 12

3.Depress the safety nose mechanism against your workpiece.

4.Before pulling the trigger, make sure your free hand and other body parts are positioned out of the way of a potential path of a nail in case of deflec- tion.

Deflection is caused when grain irregularities, knots, or foreign objects inside the wood cause the nail to change its path, resulting in the nail puncturing the surface of the workpiece, as shown in Figure 5.

Besides damaging your workpiece, deflection can cause injury if your free hand is securing the workpiece in the location that the nail deflects.

Adjusting Depth

The depth of nail penetration is adjusted with the cap screw that secures the safety nose.

To adjust the depth:

1.DISCONNECT NAILER FROM THE AIR SUPPLY!

2.Using a 4mm hex wrench, loosen the cap screw shown in Figure 6.

3.Move the safety nose away from the nailer to decrease nail depth, and toward the nailer to increase nail depth.

Figure 5. Example of nail deflection.

5.Pull the trigger.

—If the nail drove into the wood far enough, continue with your intended operations.

—If the nail either went too far or not far enough, then go to the Adjusting Depth section on this page.

Safety Nose

Cap Screw

Figure 6. Loosening cap screw for depth

adjustment.

4.Re-tighten the cap screw, then connect the nailer to the air supply and test the nail depth.

5.Repeat Steps 2–4, if necessary, until the nail depth is satisfactory.

-10-

Model H8234  28° Framing Nailer

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model H8234 Framing nailerSs ,EAD from Leadbased PAINTS Safety Safety Instructions For Pneumatic ToolsBefore Operating This Equipment Alwaysusesafetyglasses Additional Safety Instructions for Nailers Model H8234 28 Framing Nailer Introduction Foreword Contact InfoTool Data Set up UnpackingInventoryModel H8234 Inventory Figure Qty Compressed Air System Safety Nose Mechanism To check the safety nose mechanismOperationS LoadingOperating To load your nailerAdjusting Depth To adjust the depthClearing Jammed Nails To clear a jammed nail from the dis- charge areaReplacing Pistons/O Rings Accessories ⁄4 NPT air fittingsCleaning & Lubrication CleaningLubricatingH8234 Parts Breakdown H8234 Parts List DescriptionTroubleshooting Symptom Possible Cause SolutionWarranty and Returns

h8234 specifications

Grizzly H8234 is a powerful and versatile machine designed for woodworking enthusiasts and professionals alike. This heavy-duty planer boasts impressive features that set it apart in the market, making it an essential addition to any workshop.

One of the standout characteristics of the Grizzly H8234 is its robust construction. Built with a cast iron table, the machine ensures stability and minimizes vibration during operation, which is crucial for achieving precise cuts on various types of wood. The spacious work surface allows for handling larger workpieces, enhancing productivity.

The H8234 features a powerful 3 HP motor, providing ample horsepower to handle even the toughest hardwoods without bogging down. This motor drives the precision machined steel cutter head, which incorporates multiple carbide-tipped blades. The cutter head design not only delivers clean and smooth finishes but also ensures longevity and reduced maintenance requirements.

Another significant innovation of the Grizzly H8234 is its integrated automatic feed system. This system allows for continuous feeding of the wood, promoting efficiency during operation. The adjustable feed rate allows woodworkers to select the optimal speed for their specific material, further enhancing the quality of the finish.

Safety is a key focus for the Grizzly H8234. It is equipped with various safety features, including blade guards and emergency stop buttons, to help minimize the risk of accidents during operation. These features provide peace of mind for users as they navigate the complexities of woodworking.

Portability is also a critical aspect of the H8234’s design. While it is a stationary machine, it comes with built-in wheels that make it easier to move around the workshop. This flexibility allows users to rearrange their workspace as needed without a significant hassle.

Moreover, the machine offers easy height adjustments for precise thickness planning. The user-friendly handwheel allows for fine-tuning, ensuring that the desired thickness is achieved with each pass. This feature is particularly beneficial for achieving uniformity across multiple pieces of wood.

In summary, the Grizzly H8234 embodies a blend of strength, precision, and convenience, making it an invaluable tool for woodworkers. With its powerful motor, durable construction, advanced features, and focus on safety, it is well-suited for both hobbyists and professionals seeking reliable performance and quality in their woodworking projects. Whether you are crafting furniture or other intricate wood designs, the Grizzly H8234 is designed to meet the demands of the craft.
Top Page Image Contents