INTRODUCTION
Foreword | Model H7951 |
| Specifications |
|
We are proud to offer the Grizzly Model H7949/H7950/H7951 Nailer. This nailer is part of a growing Grizzly family of fine pneumatic tools. When used according to the guidelines in this manual, you can expect years of
The specifications and photographs in this manual represent Model H7949/H7950/ H7951 as supplied when this manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.
Model H7949
Specifications
Nail Type | Flat Wire Welded Coil |
Nail Length | |
Magazine Capacity | |
Weight | 5.5 lbs. |
Air Inlet | 1/4" NPT. |
Operating Pressure |
Model H7950
Specifications
Nail Type | Flat Wire Welded Coil |
Nail Length | |
Magazine Capacity | |
Weight | 6.2 lbs. |
Air Inlet | 1/4" NPT. |
Operating Pressure | |
|
Nail Type | Flat Wire Welded Coil |
Nail Length | |
Magazine Capacity | |
Weight | 5.5 lbs. |
Air Inlet | 1/4" NPT. |
Operating Pressure |
Contact Info
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com