Emerson AV101 manual Troubleshooting

Page 45

Troubleshooting (Continued)

The left and right sounds are unbalanced or reversed.

ŸCheck that the speakers and components are connected correctly and securely.

ŸAdjust front balance parameter using CH. LEVEL and R/L +/- buttons (see pages 41).

Severe hum or noise is heard.

ŸCheck that the speakers and components are connected securely.

ŸCheck that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV

set or fluorescent light.

Ÿ Move your TV away from the audio components.

ŸThe plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

ŸClean the disc.

The surround effect is difficult to hear when you are playing a Dolby Digital sound track.

ŸSet the Dolby Surround to “OFF” in the SETUP menu.

ŸCheck the speaker connections.

ŸDepending on the DVD disc, the output signal may at times be monaural or stereo even if the sound track is recorded in Dolby Digital format.

No sound is heard from the subwoofer.

ŸWhen you play A DVD movie disc, the player will automatically select DOLBY DIGITAL audio mode. If the DVD disc is recorded with Dolby Digital soundtrack you will hear sound from all 5 satellites plus subwoofer. If the DVD disc does not come with DOLBY DIGITAL and comes either Dolby Surround, Dolby Pro Logic or 2 channel Stereo soundtrack, the subwoofer will not operate. In this case press the DSP MODE button on the front panel or the remote control to select 2 CH. STEREO audio mode. This will activate the subwoofer.

The sound comes from the center speaker only.

ŸDepending on the disc at times the sound may come from the center speaker only. This is normal.

No sound is heard from the center speaker.

ŸMake sure the Center is set. (see page 41)

ŸThe listening mode may be set to Dolby Pro Logic Phantom.

ŸAdjust the center speaker volume.

No sound or only a very low-level sound is heard from the rear speakers.

ŸMake sure the Rear is set. (see page 41)

ŸThe listening mode may be set to 3-Stereo.

ŸAdjust the rear speaker volume.

Radio stations cannot be tuned in.

ŸCheck that the antennas are connected correctly. Adjust the antennas and connect an external antenna if necessary.

ŸThe signal strength of the stations is too weak (when turning in with automatic tuning). Use manual tuning.

ŸNo stations have been preset.

ŸThe tuner mode is not selected, select the Tuner mode.

The remote does not function.

ŸRemove any obstacles between the remote control and the system.

ŸMove the remote control closer to the system.

ŸPoint the remote control at the remote sensor on the front panel.

ŸReplace all the batteries in the remote control with new ones if they are weak.

ŸCheck that the batteries are loaded correctly.

The disc does not play.

ŸThere is no disc inside. (“NO DISC” appears on the front panel display and the TV screen.) Insert a disc.

ŸInsert the disc correctly with the playback side facing down on the disc tray.

ŸClean the disc (see page 13).

ŸThe system cannot play CD-ROMs, etc. (see page 12). Insert a DVD, a CD, or a MP3 disc.

ŸCheck the region code of the DVD disc (see page 12).

ŸMoisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour.

(see page 10)

The system starts playing the DVD automatically.

ŸThe DVD features the auto playback function.

Playback stops automatically.

ŸDepending on the disc, the auto pause signal is recorded. While playing such a disc, the system stops playback at the signal.

Stopping playback, Search, Slow-motion play, repeat play or Program play, etc., cannot be done.

ŸDepending on the disc, some of the above operations may not be available.

Messages do not appear on the TV screen in the language you want.

ŸSelect the language for OSD in SETUP menu (see page 36). The disc must have the language you selected, if not, other language will be selected.

The language for the sound cannot be changed when you play a DVD.

ŸMultilingual sound is not recorded on the DVD.

ŸChanging the language for the sound is prohibited on the DVD.

The language for the subtitles cannot be changed when you play a DVD.

ŸMultilingual subtitles are not recorded on the DVD.

ŸChanging the language for the subtitles is prohibited on the DVD.

The subtitles cannot be turned off when you play a DVD.

ŸDepending on the DVD, you may not be able to turn the subtitles off.

The angles cannot be changed when you play a DVD.

ŸMulti-angles are not recorded on some DVDs.

ŸChange the angles when the angle mark appears on the TV screen (see page 39).

ŸChanging the angles is prohibited on some DVDs.

The system does not operate properly.

ŸStatic electricity, etc., may affect the system’s operation. Disconnect the AC power cord once, then connect it again.

44

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Page Welcome...… Important Safety Instructions Wall or Ceiling Mounting FCC Notice Table of Contents Location of Controls and Indicators Location of Jacks and Terminals Main Display Indicators Remote Controller Important Safeguards and Precautions Important Information Regarding This Manual Features of This SystemTypes of Discs That Can be Played on This System Page Installation Inserting Remote Control BatteriesUnpacking Speaker System Connection Antenna Connections TV and Optional Component Connections Connecting the AC Power CordSpeaker Positioning Information Basic System Set UpSatellite Speakers Subwoofer Typical Speaker Set Up Controls and Their Functions Recalling Preset Stations Presetting Radio StationsChanging Preset Stations Last Station MemoryBasic Playback Playing DiscsFrame By Frame Advance ‘Step’ Function Adjusting The Speaker Levels Test Tone Understanding the Individual DVD Disc Menu Using the Title MenuSequence Repeat One Track Repeat All Tracks Repeat Off Repeat PlaybackProgram Play Audio CDs only Selecting a Start Point by Chapter or Time Code Selecting a CD Track Using Number ButtonsChecking Disc Information Using Display Button Using the Setup Menu and Navigation Buttons 3/4/5/6 Settings and AdjustmentsSetup Menu Listing TV Type Setting Multi/NTSC/PAL TV Display SettingSelecting the On Screen Display OSD Language Selecting Angle MarkSelecting Captions Screen Saver Setting Dolby Digital Setup Dynamic Range SettingSCR Saver Selecting the Language for Audio PreferencesSelecting the Language for Subtitles Selecting the Language for Disc MenusChanging the Parental Control Password Setting the Parental Control LevelZoom Control Special FunctionsAngle Selection Subtitle Language SelectionAudio Language Selection Listening to the Radio Other FunctionsAdjusting the Left/Right Balance Center Level, Rear Level, and Subwoofer Level AdjustmentsOther Sound Effects Listening to an External Source Additional Information TroubleshootingTroubleshooting DTS GlossarySpecifications Page Emerson Radio Corp Limited Warranty Emerson Radio Corp
Related manuals
Manual 4 pages 34.12 Kb

AV101 specifications

The Emerson AV101 is a cutting-edge device designed for audio-visual integration and performance, making it a standout choice for both commercial and residential applications. Known for its simplicity and versatility, the AV101 seamlessly combines advanced technology with user-friendly features.

One of the primary characteristics of the Emerson AV101 is its robust connectivity options. It supports multiple input sources, including HDMI, VGA, and audio connectors, making it highly adaptable to different setups. The incorporation of HDMI 2.0 ensures high-resolution video output up to 4K at 60Hz, providing crystal-clear image quality and vibrant color reproduction for presentations and entertainment alike.

Emerson has equipped the AV101 with an intuitive touchscreen interface, facilitating easy navigation through settings and configurations. This user-friendly design is complemented by customizable presets, allowing users to save their preferred configurations for quick access during meetings or events. Moreover, it includes remote control functionality, which enhances convenience and flexibility in usage.

The device also features advanced audio processing technologies. With built-in amplification and equalization capabilities, the AV101 delivers high-fidelity sound, ensuring that every word and note is heard clearly. This is particularly beneficial in environments that require clear communication, such as classrooms and conference rooms.

When it comes to security and data management, the Emerson AV101 excels with its robust encryption protocols. This ensures that sensitive information remains protected, making it suitable for corporate settings where data security is paramount. Furthermore, the device supports cloud connectivity, allowing for easy updates and remote management, which significantly reduces downtime.

In terms of installation, the AV101 is designed to be user-friendly. Its compact design allows for easy integration into various environments without taking up excessive space. The device is also compatible with existing AV infrastructure, further enhancing its appeal to system integrators.

Overall, the Emerson AV101 is a powerful audio-visual solution that stands out for its feature-rich design, exceptional performance, and flexibility. Whether for educational purposes, corporate environments, or home entertainment, the AV101 sets a new standard in audio-visual technology, making it an invaluable tool for enhancing communication and collaboration. Its combination of advanced features and ease of use positions it as a leading choice for those seeking high-quality audio-visual experiences.
Top Page Image Contents