Model D4088 Drill Press
Lathe Attachment
Instruction Sheet
Phone #: (360)
Introduction
The Model D4088 Drill Press Lathe Attachment allows wooden workpieces to be turned on a drill press in the same manner as a wood lathe. Items like small pickets, legs, spindles, handles, dowels, and pins can be made. Fits drill press tables with
Specifications
Tool Rest Length | 12" |
Maximum Workpiece Length (if reversed) | 24" |
Maximum Workpiece Diameter | 6" |
Shank Diameter of Screw and Spur Center | 3⁄8" |
Construction Material | Steel |
Shipping Weight | 3.5 lbs. |
Inventory
Refer to the list and Figure 2 to inventory your package. If you can't find an item on this list, check the mounting locations or examine the packaging materials carefully.
Occasionally we
If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.
Description | Qty | |
A. | Tool Rest | 1 |
B. | Screw Center | 1 |
C. | Spur Center | 1 |
D. | Hex Wrenches 5, 6mm | 1 Ea |
E. | Cap Screw | 1 |
F. | Tool Rest Foot | 1 |
G. | Carriage Bolt | 2 |
H. | Cap Screw | 1 |
I. | Base and Live Center Assembly | 1 |
J. | Flat Washer 10mm | 2 |
K. | Hex Nut | 2 |
Figure 1. D4088 Drill Press Lathe
Attachment
C
B
D
E
A |
| F |
|
| |
| H | G |
|
|
I
J
K
Figure 2. Inventory.
COPYRIGHT © JULY, 2010 BY WOODSTOCK INTERNATIONAL, INC.
| WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT | |
#13043CR | THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. | Printed in China |