Woodstock M1107 owner manual Standard Safety Instructions

Page 5

M1107 Bench grinder

SAFETY

READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided, MAY

 

result in minor or moderate injury.

NOTICE

This symbol is used to alert the user to useful information about proper

operation of the equipment, and/or a situation that may cause damage

 

to the machinery.

Standard Safety Instructions

1.THOROUGHLY READ THE INSTRUCTION MANUAL BEFORE OPERATING YOUR MACHINE. Learn the applications, limitations and potential hazards of this machine. Keep the manual in a safe and con- venient place for future reference.

2.KEEP WORK AREA CLEAN AND WELL LIGHTED. Clutter and poor lighting invite potential hazards.

3.GROUND ALL TOOLS. If a machine is equipped with a three-prong plug, it must be plugged into a three-hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in accommodating a two-hole receptacle, ground using a screw to a known ground.

4.WEAR EYE PROTECTION AT ALL TIMES. Use safety glasses with side shields or safety goggles that meet the appropriate standards of the American National Standards Institute (ANSI).

5.AVOID DANGEROUS ENVIRONMENTS. Do not operate this machine in wet or open flame environ- ments. Airborne dust particles could cause an explosion and severe fire hazard.

6.ENSURE ALL GUARDS ARE SECURELY IN PLACE and in working condition.

7.MAKE SURE SWITCH IS IN THE OFF POSITION before connecting power to machine.

8.KEEP WORK AREA CLEAN, free of clutter, grease, etc.

9.KEEP CHILDREN AND VISITORS AWAY. Visitors must be kept at a safe distance while operating unit.

10.CHILDPROOF YOUR WORKSHOP WITH PADLOCKS, master switches or by removing starter keys.

11.STOP AND DISCONNECT THE MACHINE WHEN CLEANING, ADJUSTING OR SERVICING.

-3-

SAFETY

Image 5
Contents Bench Grinder with Wide Wheel Page Contents Woodstock Technical Support SpecificationsIntroduction Standard Safety Instructions SafetyKeep Proper Footing and Balance at all times Additional Safety Instructions for Grinder 110V Operation ElectricalExtension Cords GroundingUnpacking SET UPInventory Box Inventory Figures 3 QtyTo mount the bench grinder, do these steps Shop PreparationMounting Tool Rest and Eye Shield Grinding Wheel InstallationTo perform a test run, do these steps Test RunGrinding Operations OperationsGeneral To change a grinding wheel, do these steps Changing Grinding WheelsLubrication & Cleaning MaintenanceProblem Possible Cause Corrective Action TroubleshootingM1107 Electrical System M1107 WiringM1107 Parts Diagram Parts Warranty Comments Warranty RegistrationBOX BELLINGHAM, WA