Emerson AE8-1385 specifications Electrical Shock Hazard, Pressurized System Hazard, Burn Hazard

Page 3

Application Engineering

 

 

 

B U L L E

T

I

N

Instructions Pertaining to Risk of Electrical Shock, Fire, or Injury to Persons

AE8-1385

WARNING

ELECTRICAL SHOCK HAZARD

•Failure to follow these warnings could result in serious personal injury.

•Disconnect and lock out power before servicing.

•Discharge all capacitors before servicing.

•Use compressor with grounded system only.

•Molded electrical plug must be used when required.

•Refer to original equipment wiring diagrams.

•

WARNING

PRESSURIZED SYSTEM HAZARD

•Failure to follow these warnings could result in serious personal injury.

•System contains refrigerant and oil under pressure.

•Remove refrigerant from both the high and low compressor side before removing compressor.

•

•Never install a system and leave it unattended when it has no charge, a holding charge, or with the service valves closed without electrically locking out the system.

•Use only approved refrigerants and refrigeration oils.

•Personal safety equipment must be used.

WARNING

BURN HAZARD

•Failure to follow these warnings could result in serious personal injury or property damage.

•Do not touch the compressor until it has cooled down.

•Ensure that materials and wiring do not touch high temperature areas of the compressor.

•Use caution when brazing system commponents.

•Personal safety equipment must be used.

CAUTION

COMPRESSOR HANDLING

•Failure to follow these warnings could result in personal injury or property damage.

•Use the appropriate lifting devices to move compressors.

•Personal safety equipment must be used.

Safety Statements

• Refrigerant compressors must be employed only for their intended use.

•

install, commission and maintain this equipment.

•

•All valid standards and codes for installing, servicing, and maintaining electrical and refrigeration equipment must be observed.

© 2011 Emerson Climate Technologies

3

Printed in the U.S.A.

 

Page 2 Page 4
Image 3
Page 2 Page 4
Contents ApplicationEngi Engineering Table of ContentsSafety Icon Explanation Safety InstructionsBurn Hazard Safety StatementsElectrical Shock Hazard Pressurized System HazardIntroduction InstallationOperation Service Module Dimensions in Millimeters Prot Wiring DiagramCode4 Code1Code2 CodeCoreSense Diagnostics LED Troubleshooting Information Welded Contactor Locked RotorCompressor Moderate Run TripOpen Start Circuit Open Run CircuitOver Current Protection

AE8-1385 specifications

The Emerson AE8-1385 is a cutting-edge automation solution designed to enhance operational efficiency and reliability in various industrial applications. This advanced device exemplifies Emerson’s commitment to innovation, boasting features that cater to the demands of modern industries, specifically in process control, monitoring, and data acquisition.

One of the standout features of the AE8-1385 is its robust communication capabilities. It supports multiple communication protocols, including Modbus, Ethernet/IP, and Profibus, allowing it to seamlessly integrate with existing systems and facilitate real-time data exchange. This flexibility ensures that users can connect the AE8-1385 to a wide variety of equipment and software, promoting interoperability across the production environment.

In terms of technology, the AE8-1385 integrates state-of-the-art sensing and actuation methods to provide accurate and reliable measurements. Its advanced signal processing capabilities enhance the clarity of data collected from various sensors, enabling precise control and monitoring of critical processes. The device is engineered with high-quality materials, ensuring durability and performance in harsh industrial settings.

Additionally, the AE8-1385 features a user-friendly interface that simplifies operation and reduces training time for personnel. The intuitive design allows operators to access vital information quickly, making modifications to settings or responding to alarms easier and more efficient. This focus on usability not only enhances productivity but also improves response times in critical situations.

Another essential characteristic of the AE8-1385 is its scalability. It can be deployed in small-scale applications or expanded to support larger, more complex systems as operational requirements evolve. This adaptability makes it a valuable investment for companies looking to future-proof their automation solutions.

The AE8-1385 is also equipped with advanced security features that protect against unauthorized access and data breaches, an essential consideration in today’s increasingly interconnected industrial landscape. This added layer of security ensures that sensitive operational information remains confidential and secure.

In summary, the Emerson AE8-1385 is an innovative automation solution that combines versatile communication capabilities, advanced sensing technology, user-friendly design, scalability, and robust security features. Its integration into industrial processes can lead to enhanced efficiency, improved data management, and increased operational reliability, making it an ideal choice for industries prioritizing modernization and performance.
Top Page Image Contents