Operating Procedures

INSTALLATION AND BREAK-IN PROCEDURES

Do not modify the plug that has been provided. If it does not fit the available outlet, the correct outlet should be installed by a qualified electrician.

If repairing or replacing cord or plug, the grounding wire must be kept separate from the current-carrying wires. Never connect the grounding wire to a flat blade plug terminal. The grounding wire has insulation with an outer surface that is green - with or without yellow stripes.

If these grounding instructions are not completely understood, or if in doubt as to whether the compres- sor is properly grounded, have the installation checked by a qualified electrician.

120 Volts, 15 Amps

Air Hose

The air hose attached to your comporessor has an integral pressure adjusting valve at the working end of the hose. Should service or replacement be required, make sure that the pressure adjusting valve is present in the air hose line.

DONOT REPLACE THE HOSE WITH STANDARD HOSE

THAT IS NOT EQUIPPED WITH THE PRES- SURE ADJUSTING VALVE.

Do not allow hose to become kinked or pinched at any time. This is important to avoid damage to your compressor and to maintain pressure adjusting valve control.

1.Before plugging in the air compressor, set the adjust- able pressure valve to "10" PSI. Make sure the "ON/ OFF" switch is in the "OFF" position.

2.Connect the air tool or accessory to the air hose. Tighten securely.

3.Plug the power cord into the grounded outlet.

4.Start the compressor by setting the "ON/OFF" switch to the "ON" position.

5.Check the manufacturer's maximum pressure rating for the air tool, accessory or vehicle tire being used. The air compressor outlet pressure must never exceed the maximum pressure rating.

6.Slowly increase the pressure setting of the adjustable pressure valve. You should be able to hear and feel air pressure being relieved by the adjustable pressure valve. If pressure is not being relieved, turn the air compressor off immediately. The pressure valve must be replaced.

TOO MUCH AIR PRESSURE COULD CAUSE AN AIR TOOL OR VEHICLE TIRE TO RUPTURE OR EXPLODE. CAREFULLY FOLLOW STEPS 5 AND 6 EACH TIME YOU USE YOUR COMPRESSOR.

Compressed air from the outfit may contain water condensation. Do not spray unfiltered air at an item that could be damaged by moisture. Some air operated tools or devices may require filtered air. Read the instructions for the air tool

or device.

102D-1, MGP-102D-2, C102D-1 specifications

DeVillbiss Air Power Company has established itself as a leader in the manufacture of high-quality air compressor systems and related equipment. Among their standout offerings are the C102D-1, MGP-102D-2, and 102D-1 air compressor models, which are designed to meet diverse industrial and commercial needs.

The C102D-1 is a robust air compressor that excels in providing reliable performance for various applications. Its main feature includes a powerful motor that delivers an impressive air output, making it suitable for tasks such as powering pneumatic tools and inflating tires. This model is equipped with a heavy-duty cast-iron pump, ensuring durability and longevity, even under demanding conditions. The C102D-1 also boasts a large, horizontal tank, which aids in maintaining consistent air pressure and reducing pulsation, resulting in smoother operation.

Another model, the MGP-102D-2, stands out for its versatility and advanced technology integration. This compressor comes with a unique dual-stage pump system that enhances efficiency and increases the overall output pressure, making it ideal for more intensive industrial tasks. The MGP-102D-2 is also fitted with an automatic shut-off feature that prevents overheating, adding a layer of safety and operational reliability. Its compact design allows for easy mobility, making it an excellent choice for job sites where space is limited.

Completing the lineup is the 102D-1, which offers a balance of power and portability. This compressor is designed for ease of use, with straightforward controls that allow users to quickly adjust the pressure settings. One of the distinguishing characteristics of the 102D-1 is its noise-reducing technology, making it suitable for environments where noise levels are a concern. Its lightweight build and ergonomic handle facilitate easy transport, allowing operators to move it from location to location with minimal hassle.

Overall, DeVillbiss Air Power Company’s C102D-1, MGP-102D-2, and 102D-1 models are engineered with cutting-edge technology, durable construction, and user-friendly features that make them suitable for a wide range of applications. Whether in a commercial workshop, construction site, or home garage, these air compressors provide the reliability and power needed to get the job done effectively.