3.Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket.
Using Your Ceiling Fan
4. Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 13).
5.Secure the ceiling cover in place by sliding lockwashers over the threaded studs and installing the two knurled knobs (supplied). (Figure 13). Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling and the hole in
the ceiling cover is clear of the downrod. Your fan is now wired to be turned on and off from the fan switch.
CEILING COVER
1.Restore electrical power to the outlet box by turning the electricity on at the main fuse box.
2.Check the operation of the fan by gently pulling on the pull chain switch.
3.All fans are shipped from the factory with the reversing switch positioned “down” to circulate air downward. If airflow is desired in opposite direction, turn your fan OFF and wait for the blades to stop turning, then slide the reversing switch to the “up” position, and turn fan on again.
4.The fan blades will turn in the opposite direction and reverse the airflow.
Your fan model is equipped with a
THREADED STUD LOCKWASHERS (2) KNURLED KNOB
Figure 13
!WARNING
To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.
6.Cut the
1st
2nd
3rd | CONTROL | REVERSIBLE |
| SPEED |
|
4th | SWITCH | SWITCH |
| ||
|
| |
| Reverse Switch Information | |
Season | Rotation Direction | Switch Position |
Summer | Down | |
Winter | Clockwise | Up |
7 | U.L. Model No.: CF755 |