Models NS2190 & NS3490

! WARNING

Operating Instructions

Manual de Instrucciones

Modelos NS2190 & NS3490

use. Always reconnect the air line BEFORE loading any fasteners. The nailer could eject a fastener causing death or serious personal injury.

●Protect your eyes and ears. Wear Z87 safety glasses,

with side shields.

Wear hearing protection. Employers and users are

responsible for

ensuring the user or anyone near the nailer wears this safety protection. Serious eye injury or permanent hearing loss could result.

●Do not use a check valve or

any other fitting which allows air

to remain in the nailer. Death or

serious personal injury could occur.

●Never place hands or any other body parts in the nail discharge area of the nailer. The nailer might

eject a fastener and could result in death or serious personal injury.

●Never carry the

nailer by the air hose or pull the hose to move the nailer or a

compressor. Keep hoses away from

heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur.

●Always assume the nailer contains nails. Never use the nailer as a toy. Do not engage in horseplay. Always

keep others at a safe distance from the work area in case of accidental discharge of nails. Never point the nailer at anyone. Accidental triggering of the nailer could result in death or serious personal injury.

●Do not drive a

nail on top of other nails. The nail could glance and cause death or a serious puncture wound.

●Do not operate

or allow anyone

else to operate the nailer if any warnings or warning labels are not legible.

Warnings or warning labels are located on the nailer magazine and body.

●Never leave the nailer unattended or connected to an air compressor when not in use. Serious personal injury can occur if someone picks up and uses the nailer without knowing the correct way to operate the nailer.

●Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.

CAUTION Caution indicates a

!potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.

● Do not modify or alter the nailer or any nailer parts. Do not use the nailer if any shields or guards are removed or altered. Do not use the nailer as a

hammer. Personal injury or tool dam.occur.

●Avoid long extended periods of work with the nailer. Stop using the nailer if you feel pain in hands or arms.

●Always check that the Work Contact Element (WCE) is operating properly. A

nail could accidentally

be driven if

the WCE is not working properly. Personal injury may occur (See "Checking the Work Contact Element" Section).

●Disconnect air supply and release tension from the pusher before attempting to clear jams because fasteners can be ejected from the front of the nailer. Personal injury may occur.

NOTICE	Notice indicates
	important

information, that if not followed, may cause damage to equipment.

●Avoid using the nailer when the magazine is empty. Accelerated wear on the nailer may occur.

●Clean and check all air supply hoses and fittings before connecting the nailer to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced.

●Air compressors providing air to the nailer should follow the requirements established by the American National Standards Institute Standard B19.3-1991; Safety Standard for Compressors for Process Industries. Contact your air

Notas

Nailer Components And Specifications			Adjustable Direction
Nailer Components And Specifications			Exhaust Deflector	Threaded Hole/Tool
				Threaded Hole/Tool
				Balancer (M8 x 1.25)
	NS2190	NS3490		Nail Loading Area
• REQUIRES (SCFM with 16				Single Cycle
nails per minute @ 90 psi)	4.1	4.1		Single Cycle
nails per minute @ 90 psi)	4.1	4.1		Trigger
				Trigger
• AIR INLET	1/4” NPT	1/4” NPT
• NAIL LENGTH RANGE	2” to 31⁄2”	2” to 31⁄2”		Magazine
• NAIL SHANK RANGE	0.113” to 0.131”	0.113” to 0.131”		Magazine
• NAIL SHANK RANGE	0.113” to 0.131”	0.113” to 0.131”
• MAGAZINE CAPACITY	60-75	75-105
• WEIGHT	8 lbs. 5 oz.	8 lbs. 11 oz.
• LENGTH	19.5”	19.75”
• HEIGHT	15”	15”		Warning Labels
			Work	Warning Labels
• MAXIMUM PRESSURE	120 psi	120 psi	Work
• MAXIMUM PRESSURE	120 psi	120 psi	Contact
			Contact	Nail Discharge
• PRESSURE RANGE	70 - 120 psi	70 - 120 psi	Element	Nail Discharge
• PRESSURE RANGE	70 - 120 psi	70 - 120 psi		Area
				Area

www.chpower.com

2	7-Sp

NS2190, NS3490 specifications

The Campbell Hausfeld NS3490 and NS2190 are two powerful and versatile air compressors designed for a wide range of applications in both professional and home settings. Known for their exceptional performance and durability, these models cater to users who need reliable tools for tasks like inflating tires, powering pneumatic tools, or even operating spray guns.

One of the standout features of the NS3490 is its oil-lubricated pump, which not only extends the life of the compressor but also operates more quietly than its oil-free counterparts. This makes it ideal for users who work in noise-sensitive environments. The NS3490 boasts a robust 3.5 horsepower motor, providing ample power for demanding applications, with a maximum psi of 125 to ensure quick recovery times.

On the other hand, the NS2190 is notable for its compact and lightweight design, making it highly portable and perfect for smaller work areas or home use. While it has a lower horsepower rating of 1.5, it delivers efficient performance with a maximum psi of 120. The oil-free design of the NS2190 means that it's low maintenance and user-friendly, allowing for quick start-ups and hassle-free operation.

Both models feature durable construction, ensuring long-lasting performance in various conditions. The easy-to-read pressure gauges on each compressor allow users to monitor pressure levels accurately, enhancing safety and efficiency during use. Additionally, they are equipped with thermal overload protection, which automatically shuts off the motor to prevent overheating and potential damage.

These compressors are also compatible with a wide array of accessories, including air hoses, spray guns, and nailers, making them multifunctional tools suitable for numerous applications. The ability to deliver consistent air flow and pressure makes them valuable assets for both DIY enthusiasts and professionals in trades like carpentry and automotive repair.

In terms of technology, the Campbell Hausfeld NS3490 and NS2190 highlight the brand's commitment to innovation. Features such as low vibration operation and quick connect fittings optimize user experience, while the integrated carry handle enhances portability.

Overall, the Campbell Hausfeld NS3490 and NS2190 exemplify high-quality engineering and thoughtful design, meeting the needs of users who seek reliability and performance in their air compressors. With their range of capabilities, these models stand out in the competitive landscape of air compression technology.