Parkside PSBM 500 A1 manual Included items, Technical data, Workplace safety

Page 6

Introduction / General safety advice for electrical power tools

 

Included items

 

 

WARNING!

The vibration level given in these

 

 

instructions has been measured in accordance with

1

Impact drill PSBM 500 A1

a standardised measurement procedure specified

1

Auxiliary handle

in EN 60745 and can be used to compare devices.

1

Depth stop

Different uses of the device give rise to different vibra-

1

Carry case

tion levels and in many cases they may exceed the

1

Operating instructions

values given in these instructions. It is easy to underes-

 

 

timate the vibration load if the electrical power tool

 

 

is used regularly in particular circumstances.

Technical data

Nom. voltage:

230 V~ 50 Hz

Rated power:

500 W

No-load rotational

 

speed:

50 - 3000 min–1

Chuck capacity:

max. 13 mm

Drilling in steel:

max. ø 10 mm

Drilling in wood:

max. ø 20 mm

Drilling in concrete:

max. ø 13 mm

Protection class:

II /

Noise and vibration data:

Measured values for noise are determined in accor- dance with EN 60745. The A-weighted noise level of the electrical power tool are typically:

Sound pressure level:

86 dB(A)

Sound power level:

97 dB(A)

Uncertainty K:

3 dB

Wear ear protection!

Impact drilling in concrete: max. Vibration emission value

ah, ID= 10.2 m / s2 Uncertainty

K = 2.0 m / s2

Drilling in metal:

max. Vibration emission value

ah, D= 6.5 m / s2 Uncertainty

K = 1.5 m / s2

Note: If you wish to make an accurate assessment of the vibration loads experienced during a particu- lar period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actual- ly in use. This can result in a much lower vibration load over the whole of the period of working.

General safety advice for electrical power tools

WARNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury.

Keep all the safety advice and instructions in a safe place for future reference!

The term “electrical tool” used in the safety advice refers to electrical tools powered by mains electricity (by means of a mains lead) and electrical tools powered by rechargeable batteries (without a mains lead).

1. Workplace safety

a)Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents.

b)Do not work with the device

in potentially explosive envi- ronments in which there are

inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes.

GB/IE 7

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Impact Drill Psbm 500 A1 GB / IE Page Table of contents Impact drill Psbm 500 A1 Introduction FeaturesIntroduction Proper useTechnical data Workplace safetyIncluded items Personal safety General safety advice for electrical power toolsElectrical safety Do not use the mains lead forCareful handling and use of electrical power tools Safety advice for hammer-action drillsUsing the depth stop General safety advice for … / Before first useOriginal accessories / attachments Attaching the auxiliary handleInfinitely adjustable speed setting Switching on and offSwitching between drilling / hammer-action Setting the direction of rotationService centre / Warranty / Disposal WarrantyDisposal Declaration of conformity / Producer Declaration of conformity ProducerPage Allgemeine Sicherheitshinweise für Elektrowerkzeuge InhaltsverzeichnisEinleitung Vor der InbetriebnahmeBestimmungsgemäßer Gebrauch EinleitungSchlagbohrmaschine Psbm 500 A1 Einleitung AusstattungLieferumfang Technische DatenArbeitsplatz-Sicherheit Sicherheit von Personen Allgemeine Sicherheitshinweise für ElektrowerkzeugeElektrische Sicherheit Zweckentfremden Sie das Kabel nicht, um das ElektroVerwendung und Behandlung des Elektrowerkzeugs Sicherheitshinweise Für SchlagbohrmaschinenTragen Sie Schutzbrille und Staubschutzmaske Zusatz-Handgriff montieren Achtung LeitungenOriginalzubehör / -zusatzgeräte Tiefenanschlag verwendenBohren / Schlagbohren umschalten Ein- und ausschaltenDrehrichtung einstellen Drehzahl stufenlos regulierenGarantie Wartung und Reinigung / Service / Garantie / EntsorgungService EntsorgungKonformitätserklärung / Hersteller Konformitätserklärung HerstellerKompernass Gmbh

PSBM 500 A1 specifications

The Parkside PSBM 500 A1 stands out as a versatile and efficient tool for both DIY enthusiasts and professionals. This powerful, compact bandsaw is designed for cutting various materials, making it a must-have for any workshop. With its robust performance and user-friendly features, the PSBM 500 A1 offers a seamless cutting experience.

One of the most notable features of the Parkside PSBM 500 A1 is its 500-watt motor. This powerful motor provides sufficient cutting power to handle various tasks, from simple wood cuts to more demanding materials like metal and plastic. The variable speed control is another significant advantage, allowing users to adjust the cutting speed according to the material's requirements. This adaptability ensures clean and precise cuts every time.

The bandsaw is equipped with a 62-inch blade, providing an impressive cutting depth of 80 millimeters for wood and 10 millimeters for metal. This versatility means you can achieve a range of cuts, including straight, curved, and intricate shapes. The adjustable angle guide further enhances this capability, facilitating bevel cuts for more complex projects.

In terms of safety, the Parkside PSBM 500 A1 doesn’t compromise. It features a transparent safety guard that allows users to monitor the cutting process while minimizing the risk of accidents. The machine also includes a solid base, ensuring stability during operation, which is crucial for achieving accurate cuts.

The design of the PSBM 500 A1 emphasizes portability and ease of use. Weighing just 8.5 kg, the bandsaw can be easily transported from one location to another. Additionally, the integrated dust extraction port helps maintain a clean workspace by connecting to dust extraction systems or vacuum cleaners, ensuring that users can focus on their projects without the distraction of debris.

Lastly, the Parkside PSBM 500 A1 embodies durability and reliability, constructed with high-quality materials that can withstand heavy use over time. The combination of advanced technologies, user-friendly features, and solid design makes the PSBM 500 A1 an excellent choice for anyone looking to enhance their cutting capabilities. Whether you are a beginner or an experienced craftsman, this bandsaw promises to deliver precision and efficiency for a wide range of applications.
Top Page Image Contents