Fujitsu SK-TSC-1125S quick start Installation, Setup Starter Kit Hardware

Page 7

SK-TSC-1125S User Guide

2 Installation

2.1Setup (Starter Kit Hardware)

Carefully remove the PCBs from the shipping carton.

Please follow the steps below to assemble the Starter Kit:

1.Connect the ribbon cable end with the pull relief to X1 on the ADA-16FX-TSC-LCD. Pin1 (Marked on the cable) of the cable must be on the left side close to the pin header X3. Please note that for compatibility with earlier products, the plug of this cable end is rotated so that the Pin1 marking of the cable is at the opposite side of the one on the plug.

2.Mount the ADA-16FX-TSC-LCD on the SK-16FX-EUROSCOPE by pressing it on X2 of the SK-16FX-100PMC PCB. Be sure that both connectors match exactly before pressing both boards together. X2 is the pin header close to the SUB-D connectors on the SK-16FX-EUROSCOPE.

3.OPTIONAL: Connect the LCD (not included) to X5 of the ADA-16FX-TSC-LCD. Pin1 is located on the left side. The example software assumes a 20x4 LCD (e.g. DisplayTech 204B). Optionally a resistor can be mounted for the LCD backlight supply via Pins 15 and 16 of X5. Contrast can be set using RP1 on the ADA-16FX- TSC-LCD board.

4.Connect the remaining ribbon cable end to the touch board SK-TSC-1125S-TB. Pin1 of the cable must be located in direction of the lower PCB edge.

5.Connect the SK-16FX-100PMC to a PC via USB using a standard USB connection. Please proceed as explained in the SK-16FX-EUROSCOPE user guide. It can be found on the CD accompanying the SK-16FX-EUROSCOPE; this CD also contains the USB drivers, the Softune Workbench and the EUROSCOPE debugging environment. The example firmware can be programmed using the Flash programmer which can also be found on the same CD.

© Fujitsu Microelectronics Europe GmbH

- 7 -

Image 7
Contents TSC Revision History Warranty and Disclaimer Contents Abstract OverviewGeneral Description FeaturesSetup Starter Kit Hardware InstallationPictures Setup PC SoftwareSystem set-up Jumper settings SCL JP6LCD header X5 pinout ADA-16FX-TSC-LCD I2C header X1 pinout ADA-16FX-TSC-LCDFurther connection options Fujitsu Microelectronics Europe GmbH Fujitsu Microelectronics Europe GmbH Monitor Mode ‚mon2’ SK-16FX-EUROSCOPE Related ProductsMCU Touch sensor controllers Information in the WWWChina RoHS regulation Germany Recycling

SK-TSC-1125S specifications

Fujitsu's SK-TSC-1125S is an advanced storage solution designed to meet the increasing demands of data management in modern businesses. This device stands out due to its high reliability, impressive performance, and cutting-edge technology. Engineered for efficiency, the SK-TSC-1125S is especially suitable for both enterprise-level applications and small to medium-sized businesses that require robust data handling capabilities.

One of the key features of the SK-TSC-1125S is its high-capacity storage. With up to 12TB of data capacity, this storage solution caters to the needs of organizations dealing with vast amounts of information. This scale of storage allows for greater flexibility in managing large databases, virtual environments, and extensive backup solutions, ensuring that businesses can maintain efficient operations without encountering storage bottlenecks.

Additionally, the SK-TSC-1125S utilizes advanced data protection features, including RAID configurations. These configurations enhance data availability and redundancy, protecting against hardware failures. The ability to switch between various RAID levels provides versatility for different data protection needs, making it adaptable to various business requirements.

The performance of the SK-TSC-1125S is further enhanced by its use of high-speed interface technologies. Supporting USB 3.0 and other high-throughput connectivity options, this device ensures rapid data transfer speeds, significantly reducing the time to back up or retrieve critical information. This speed is vital for organizations looking to streamline their workflows and enhance productivity.

In terms of energy efficiency, the SK-TSC-1125S incorporates power-saving technologies that help reduce operational costs. With features like automatic power management and low power consumption during idle states, this storage solution aligns with modern sustainability initiatives, making it an eco-friendly choice for businesses.

Moreover, Fujitsu emphasizes user-friendly features, including intuitive management software that allows users to monitor performance, conduct health checks, and manage configurations with ease. This simplification of management processes translates into reduced downtime and more efficient resource allocation.

In conclusion, Fujitsu’s SK-TSC-1125S is a compelling storage solution that combines high capacity, reliability, performance, and energy efficiency. With its advanced technologies and robust features, it is well-equipped to address the diverse data management needs of contemporary enterprises, paving the way for effective data utilization and strategic business growth. As organizations increasingly rely on data-driven decision-making, solutions like the SK-TSC-1125S stand ready to support their journey toward digital transformation.