ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
PACKING LIST
Angle Grinder with Guard
Bag
Clamp Nut
Disc Flange
Grinding Wheel
Side Handle
Wrench
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
SIDE HANDLE
Fig. 2
TO | WRENCH |
TIGHTEN | |
TO | CLAMP NUT |
LOOSEN |
|
| GRINDING WHEEL |
| TOOLLESS |
DISC FLANGE | GUARD |
| |
SPINDLE |
|
SPINDLE
LOCK BUTTON
Fig. 3
ATTACHING THE SIDE HANDLE
See Figure 2.
To attach the side handle: � Unplug the grinder.
� Screw the handle into the side of the gear housing.
NOTE: You can install the handle on either the left or right side of the grinder, depending on operator preference. The handle must always be used to prevent loss of control and possible serious injury.
� Tighten the side handle securely.
10