RIDGID R830153 manual Service, Symbol Signal Meaning

Page 7

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

 

 

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

 

in death or serious injury.

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

 

in death or serious injury.

 

 

 

 

 

 

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in

 

minor or moderate injury.

 

 

 

 

 

 

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result in property

 

damage.

 

 

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call RIDGID customer service for assistance.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

7

Image 7
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesSafety Rules for Charger Important Safety InstructionsSymbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Battery FeaturesProduct Specifications Switch TriggerAssembly Operation LED Function of Charger LED Battery RED Green Action Indicator PackGreen LED Evaluate RED LED Indicator Defective Battery Average Charge TimeTo Remove Battery Pack To Install Battery PackSwitch Trigger HI Speed Unlock Release Lock Direction of Rotation Selector FORWARD/REVERSE/CENTER LockReverse Forward TWO Speed Gear Train HI-LOAdjusting Torque Adjustable Torque ClutchTo Increase Torque BIT BIT Storage Area Drill BIT Installing BitsUsing the Auxiliary Handle Assembly Removing BitsDrilling Batteries MaintenanceGeneral Maintenance Battery Pack Removal Preparation for RecyclingTo Retighten a Loose Chuck Chuck RemovalMallet Chuck Jaws HEX KEY Keyless Screwdriver HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyCustomer Service Information