SPECIFICATIONS
Chuck | 1/2 in. (13 mm) Keyless |
Motor | 14.4 Volt DC |
Switch | Variable Speed |
Gear Train | 2 Speed |
No Load Speed | |
Clutch | 24 Positions |
Charger Input | 120 V, 60 Hz, AC only |
Charge Rate | 30 minutes |
Torque | Maximum 415 in.lb. |
UNPACKING |
|
INSTRUCTIONS
When unpacking the tool:
nCarefully remove the tool and accessories from the box.
nMake sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
1/2 in. (13 mm) Two Speed Drill Charger
Battery Pack (2)
Auxiliary Handle
Operator’s Manual Case
WARNING:
If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
APPLICATIONS
You may use the two speed drill for the purposes listed below:
nDrilling in wood
nDrilling in ceramics, plastics, fiberglass, and laminates
nDrilling in both hard and soft metals
nUsing driving accessories, such as driving screws with screwdriver bits
nMixing paints
7