To Install Battery Pack, To Remove Battery Pack

OPERATION

TO INSTALL BATTERY PACK

nLock the switch trigger on the drill by placing the direction of rotation (forward-reverse) selector in center position. See Figure 4.

nPlace battery pack in the drill. Align raised rib on battery pack with the groove inside the drill. See Figure 5.

nMake sure the latches on each side of your battery pack snap in place and battery pack is secured in the drill before beginning operation.

CAUTION:

When placing battery pack in the tool, be sure raised rib on battery pack aligns with the slide on the bottom of the drill and latches snap into place properly. Improper assembly of the battery pack can cause damage to internal components.

TO REMOVE BATTERY PACK

nLock the switch trigger on the drill by placing the direction of rotation selector in center position. See Figure 4.

nLocate latches on side of battery pack and depress to release battery pack from the drill. See Figure 5.

nThe battery pack will automatically disconnect in direction to be removed when buttons are depressed.

nRemove the battery pack from your drill.

SELECTOR WITH CENTER

LOCK POSITION

REVERSE

FORWARD

Fig. 4

DEPRESS LATCHES TO

RELEASE BATTERY PACK

Fig. 5