RIDGID R7120 manual Operation, Applications, Switch, Reversible

Page 11

OPERATION

WARNING:

Exercise caution when using this tool. Careless ac- tions, for even a fraction of a second, can result in serious personal injury.

APPLICATIONS

You may use the spade handle drill for the purposes listed below:

■Drilling in wood

■Drilling in both hard and soft metals

■Using driving accessories, such as driving screws with screwdriver bits

■Mixing paints and drywall compounds

WARNING:

Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury.

SWITCH

See Figure 6.

To turn the drill ON, depress the switch trigger. Release the switch trigger to turn the drill OFF.

REVERSIBLE

See Figure 6.

The direction of chuck rotation is controlled by the rocker- type switch trigger. For clockwise drilling, depress the lower half of the switch trigger.

To reverse the direction to counterclockwise (for removing screws), depress the upper half of the switch trigger.

Release the switch trigger and allow the drill to stop before changing its direction.

CAUTION:

To prevent gear and motor damage, always allow the chuck to come to a complete stop before chang- ing the direction of rotation.

LOCK-ON BUTTON

See Figure 7.

This tool is equipped with a lock-on feature, which allows continuous operation for extended periods of time. To lock- on, depress the switch trigger. Push in and hold the lock-on button, located beneath the switch trigger, then release switch trigger. Release lock-on button and the drill will continue run- ning.

Note: This feature applies only to operation in the forward direction.

R

REVERSE

F

FORWARD

Fig. 6

R

F

FORWARD

LOCK-ON

BUTTON

Fig. 7

To release the lock, depress the switch trigger and release. If you have the lock-on feature engaged during use and the drill becomes disconnected from power supply, disengage the lock-on feature immediately.

WARNING:

To avoid loss of control or serious personal injury, when drilling in lock-on mode, keep your hand posi- tioned on the switch. This will allow you to to stop the drill immediately in case binding occurs.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyAdditional Safety Rules Specific Safety RulesService Symbol Name DESIGNATION/EXPLANATION SymbolsExtension Cords ElectricalDouble Insulation Electrical ConnectionFeatures Packing List UnpackingInstructions Installing Spade Handle AssemblyInstalling Auxiliary Handle Wrong To Install BitsTo Remove Bits Chuck KEYReversible SwitchOperation ApplicationsSee Figures 8 DrillingTo Retighten a Loose Chuck MaintenanceChuck Removal Brush Replacement Lubrication AccessoriesGeneral Page HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the Limited Three Year WarrantyR7120 Single Speed/Reversible Double Insulated

R7120 specifications

The RIDGID R7120 is a powerful and versatile tool designed for both professional contractors and serious DIY enthusiasts. This model stands out in the market for its robust features, innovative technologies, and user-friendly design, making it a popular choice for a wide range of tasks.

At the core of the RIDGID R7120 is its impressive 15-amp motor, which delivers an optimal speed of up to 5,500 RPM. This high power output ensures that the equipment can tackle tough materials and heavy-duty applications with ease. Whether you’re cutting through hardwood, engineered wood, or plastic, the R7120 efficiently handles the job within a short timeframe.

One of the standout features of the RIDGID R7120 is its integrated laser guide, which provides precise cutting lines for improved accuracy. This laser system assists users in making straight and clean cuts every time, which minimizes waste and enhances the overall quality of the work. The adjustable cutting depth and bevel angles also add to its versatility, allowing seamless transitions between different projects and material types.

The R7120's design emphasizes user comfort and control. It is equipped with a soft-grip handle that reduces fatigue and provides a secure grip, making it comfortable to use for extended periods. Additionally, the lightweight and compact nature of the tool makes it easy to maneuver, whether you’re working on flat surfaces or in tight spaces.

Safety is also a key consideration with the RIDGID R7120. It features a robust blade guard that protects the user during operation, while the power switch includes a safety lock to prevent accidental starts. This focus on safety does not detract from performance; rather, it enhances user confidence while using the tool.

Lastly, RIDGID is known for its reliability, and the R7120 is no exception. It is backed by a lifetime service agreement, which underscores the manufacturer’s commitment to quality. The availability of replacement parts and accessories further ensures that users can maintain their tools efficiently.

In summary, the RIDGID R7120 is a commendable addition to any toolkit, combining powerful performance, precision features, and user-friendly design. Whether you are a seasoned professional or a passionate weekend warrior, this tool is designed to meet your cutting needs with excellence.
Top Page Image Contents