RIDGID R6300 manual Assembly

Page 9

FEATURES

KNOW YOUR IMPACT WRENCH

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

SWITCH TRIGGER

The rocker-type switch trigger is located on the handle of the tool and is reversible for changing the direction of rotation.

TWO SPEED SWITCH

The impact wrench has a two-speed motor designed for op- eration at LO (1) or HI (2) speeds. A slide switch is located on top of the wrench to select either LO (1) or HI (2) speeds.

DRIVE SHANK

The square 1/2 in. drive shank with detent retention pin pro- vides easy installation and removal of sockets by pushing them on or pulling them off the shank.

POWER CORD

Your impact wrench has a 12-foot power cord. The shape of the plug is designed not to snag on your work.

LIGHTED PLUG

The lighted plug helps to easily identify live tools.

REPLACEABLE BRUSHES

Externally accessible brushes extend the life of the ma- chine.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-866-539-1710 for assistance.

PACKING LIST

1/2 in. Impact Wrench Carrying Case Operator's Manual

WARNING:

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

9

Image 9
Contents Double Insulated OPERATOR’S ManualIntroduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Double Insulation ElectricalElectrical Connection Extension CordsProduct Specifications FeaturesSwitch Replaceable Brushes Trigger Lighted Plug Power Cord Drive Shank TWO-SPEEDAssembly Reverse Forward Switch Trigger TWO-SPEED TWO-SPEED SwitchOperation ApplicationsOperating the Impact Wrench Installing and Removing SocketsImpact Time SocketGeneral Maintenance MaintenanceBrush Replacement LubricationDAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information