OPERATION
LED FUNCTION OF CHARGER
See Figure 3.
LED | BATTERY | RED | GREEN | ACTION |
INDICATOR | PACK | LED | LED |
|
Power | Without battery pack | ON | OFF | Ready to charge battery pack |
|
|
|
| When battery pack reaches cooled |
Evaluate | Hot battery pack | Flashing | OFF | temperature, charger begins fast |
|
|
|
| charge mode |
|
|
|
| When battery pack reaches warmed |
Evaluate | Cold battery pack | Flashing | OFF | temperature, charger begins fast |
|
|
|
| charge mode |
|
|
|
| Charger |
Evaluate | Deeply discharged | Flashing | OFF | mal voltage is reached, then begins |
|
|
|
| fast charge mode |
Defective | Defective | Flashing | Flashing | Battery pack or charger is defective. |
• If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a second time, try charging a different battery.
• If a different battery charges normally, dispose of the defective pack (see Maintenance section).
• If a different battery also indicates “Defective,” the charger may be defective.
|
| Charging | Fast charging | ON | Flashing | See chart below for charge times |
|
|
|
|
|
|
|
|
| Full | Slow charging | OFF | ON | Fast charging is complete. |
|
| |||||
|
| |||||
|
| Charger maintains charge mode. | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
| POWER |
RED LED | INDICATOR |
GREEN LED | EVALUATE |
| INDICATOR |
| BATTERY | AVERAGE CHARGE TIME |
|
|
|
| COMPACT SERIES | 18 min. |
|
|
|
| HC | 27 min. |
|
|
|
DEFECTIVE | HC 2.5 | 34 min. |
|
| |
|
| |
INDICATOR |
|
|
CHARGING
INDICATOR
NOTE: The 9.6 Volt, 12 Volt, and 14.4 Volt battery packs will not slide all the way down onto the char- ger port. Insert 9.6 Volt, 12 Volt, and 14.4 Volt battery packs until they click into place and are aligned with the line on the charger, shown at left.
FULL | Allow up to 5 seconds for the “charge” light to come | |
INDICATOR | on after the battery pack is inserted. | Fig. 3 |
| ||
|
|
11