RIDGID R175RND manual Customer Service Information

Page 22

OPERATOR’S MANUAL

ROOFING COIL NAILER

R175RND

Customer Service Information:

For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

The model number of this tool is found on a plate attached to the magazine cover of the tool. Please record the serial number in the space provided below. When ordering repair parts, always give the following information:

Model No.

R175RND

 

Serial No.

 

987000-028

 

2-27-07 (REV:00)

22

Image 22
Contents OPERATOR’S Manual R175RNDTable of Contents IntroductionService General Safety RulesPersonal Safety Work AreaSpecific Safety Rules OperationAIR Supply and Connections Loading ToolSymbols Symbol Name DESIGNATION/EXPLANATIONGlossary of Terms Activate operating controlsFeatures Product SpecificationsQUICK-CONNECT Swivel Connector Adjustable ExhaustDepth of Drive Adjustment Know Your Roofing Coil NailerUnpacking AssemblyOperation Packing ListAdjusting the Exhaust Preparing the Tool for USEConnecting the Tool to AN AIR Supply Adjusting the Offset Magazine See Figures 5Loading the Tool with Nails See Figures 7Contact Actuation Mode Using the Selectable TriggerSingle Sequential Actuation Mode See Figures 10Setting the AIR Pressure Drive Depth AdjustmentRemoving Nails Using the Shingle GuideClearing a Jammed Fastener Maintenance Required Daily Checklist See Figures 16Troubleshooting AccessoriesProblem Possible Cause Solution Warranty Customer Service Information