Emerson CF705HTW04, CF705PB04, CF705AGW04, CF705ORB04 How to Put Your Ceiling Fan Together

Page 4

How to Put Your Ceiling Fan Together

1.Pass the 42” motor leads through the opening in the ceiling cover. Be sure the cover is oriented correctly (Figure 1).

2.Separate, untwist and unkink the three motor leads. Route the motor leads through the hanger ball/downrod assembly.

3.Loosen the two screws in the motor coupling. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 1). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the hanger ball to make sure the clevis pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrews securely tightened. Failure to verify that the pin and setscrews are properly installed could result in the fan falling.

MOTOR

M5 x 10COUPLING

SETSCREWS

CLEVIS PIN

HAIRPIN

CLIP

HANGER BALL/

DOWNROD ASSEMBLY

CEILING

COVER

CLEVIS

CLEVIS

PIN

PIN

M5 x 10

HAIRPIN

SETSCREWS

CLIP

 

 

MOTOR COUPLING

Figure 1

4.While pulling up on the hanger ball, securely tighten the two setscrews in the motor coupling

(Figure 1).

NOTE: The setscrew must be properly installed as described above, or fan wobble could result.

5.The fan comes with blue, black and white leads that are 42-inches long. Before installing the fan, measure up approximately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from end of leads.

6.Mount the blade flanges to fan blades using three M5 x 6 washer head blade screws per blade (Figure 2).

!WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

M5 x 6 WASHER HEAD BLADE

SCREW (3)

 

FAN BLADE

Figure 2

BLADE FLANGE

NOTE: Take care not to scratch fan housing when installing blades.

NOTE: Remove and discard the four shipping spacers and screws from the motor hub.

7.Turn the fan assembly upside down in preparation for mounting the fan blade assemblies.

8.Rotate the motor hub until the flange screw hole is next to the cutout in the switch housing plate. Attach the blade assembly to the motor hub using the two M6 x 14 flange screws preassembled in flange (Figure 3). Make sure all screws are tight- ened. Repeat this procedure for the other four blade assemblies.

SWITCH HOUSING

BLADE FLANGE

PLATE

 

MOTOR HUB

PREASSEMBLED M6 x 14

FLANGE SCREWS (2)

Figure 3

9.The blade flanges have an interlocking feature that must be fully engaged before tightening the screws. Make sure all the flanges are properly engaged and then tighten the flange screws. If one of the flanges does not seat properly on the motor hub, loosen the adjacent flange screws, re- engage and reseat the flanges, then tighten the screws again.

10.Engage the connector of the switch housing assembly with the motor connector (Figure 4). The two connectors are keyed and color-coded and must be mated correctly (color-to-color) before they can be engaged. Make sure the con- nector latch closes properly.

4

U.L. Model No.: CF705

Image 4
Contents Read and Save These Instructions Safety Instructions Tools Needed for Assembly Unpacking InstructionsHow to Put Your Ceiling Fan Together Electrical Requirements How to Hang Your Ceiling Fan How to Wire Your Ceiling Fan Using Your Ceiling Fan Energy Efficient Use Ceiling FansMaintenanceAccessories Trouble ShootingRepair Parts HOW to Order Repair PartsRepair Parts Listing Air Comfort Products

CF705BS04, CF705AW04, CF705SCB04, CF705BZH04, CF705PB04 specifications

The Emerson CF705 series ceiling fans, including models CF705HTW04, CF705CK04, CF705ORB04, CF705AGW04, and CF705BC04, represent a blend of aesthetic charm and advanced technology. These fans cater to various design preferences while delivering efficient airflow to create a comfortable indoor environment.

One of the standout features of the CF705 series is its sleek design. Each model offers unique finishes suited for different interior styles. For instance, the CF705HTW04 features a handsome white finish that complements modern and transitional decor, while the CF705CK04, with its classic brushed nickel finish, brings a touch of elegance to contemporary settings. The CF705ORB04, in oil-rubbed bronze, caters to rustic and vintage themes, whereas the CF705AGW04 showcases an antique gray wood finish perfect for farmhouse aesthetics. Lastly, the CF705BC04, with its black finish, adds a bold statement to any room.

These fans are not just about looks; they are engineered for performance. Each fan is equipped with a powerful motor that guarantees optimal airflow while remaining whisper-quiet. This technology ensures you can enjoy the cooling benefits of the fan without the disruptive noise often associated with ceiling fans. Additionally, the fans feature an energy-efficient design that reduces electricity consumption, making them an eco-friendly choice for any home.

The CF705 series also incorporates a versatile lighting package, allowing you to choose the right ambiance for your space. The integrated LED light kits are energy-efficient and provide ample illumination, making them ideal for areas where lighting is essential. The compatibility with dimmer switches further enhances the user experience, allowing customization of the brightness according to mood and time of day.

Installation is made easy with the fan’s user-friendly mounting system, enabling even DIY enthusiasts to set it up without professional assistance. The fans come with a remote control option, allowing users to operate the fan and lights conveniently from anywhere in the room.

Overall, the Emerson CF705 series ceiling fans combine beautiful design, advanced technology, and practical functionality, making them an excellent addition to any home. Whether you're looking to enhance your living room, bedroom, or outdoor space, these ceiling fans promise to deliver comfort and style in equal measure.