Assembly

FEATURES

KNOW YOUR JIG SAW

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

ANTI-SPLINTERING INSERT

The anti-splintering insert prevents splintering of the workpiece material for a smoother cut. It is especially helpful when cutting plywood.

BLADE GUARD

The wire blade guard helps protect the operator from accidental contact with the saw blade.

CHIP SHIELD

A clear plastic chip shield on the front of your saw helps protect against flying dust and chips.

NO-MAR PLATE

The no-mar plate has a smooth finish and can be snapped on over the metal shoe of the jig saw. This makes it easier to glide the tool along a delicate work surface without marring it.

ORBITAL ADJUSTMENT KNOB

The orbital adjustment knob allows you to select five orbital settings to cut materials of varying thickness and density.

RECESSED BLADE-SUPPORT ROLLER

The recessed blade-support roller ensures accurate cutting. Its hard-wearing die-cast aluminum casing helps protect against overheating.

TOOL-FREE BLADE CLAMP

The tool-free blade clamp does not require the use of a blade wrench when installing or removing the blade.

TOOL-FREE SHOE ADJUSTMENT

With the tool-free shoe adjustment lever, you can make quick changes to the bevel setting. The shoe can be angled 45˚ left or right for bevel cutting, with positive stops in 15˚ increments.

TRIGGER LOCK

The trigger lock prevents the saw from accidental starting. The switch trigger cannot be depressed until the trigger lock is depressed.

UNPACKING

This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call 1-866-539-1710 for assistance.

PACKING LIST

18V/24V Jig Saw

T-Shank Saw Blades (2)

Anti-Splintering Insert

Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.